[PATCH v2 0/4] drm/panel: atna33xc20: Fix the Samsung ATNA45AF01 panel
From: Stephan Gerhold
Date: Mon Jul 15 2024 - 08:16:20 EST
The backlight of the Samsung ATNA45AF01 panel used in the Qualcomm X1E80100
CRD does not work correctly with the current display panel configuration
and drivers: It works after boot, but once the display gets disabled it is
not possible to get it back on. It turns out that the ATNA45AF01 panel
needs exactly the same non-standard power sequence as implemented for
ATNA33XC20 in the panel-samsung-atna33xc20 driver.
Move the ATNA45AF01 panel from the generic panel-edp driver to the
panel-samsung-atna33xc20 driver and fix the panel configuration in the
x1e80100-crd device tree to make the panel work correctly.
The panel and DT changes can be picked up independently. Since v2 uses the
existing "samsung,atna33xc20" compatible as fallback, the DT changes work
even without the driver changes.
Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
---
Changes in v2:
- Use fallback compatible to avoid changes in driver (Doug)
- ... this allows applying the DT change as fix, so add Fixes: tag there
- Add review tags (except Krzysztof's, since the binding changed quite a bit)
- Link to v1: https://lore.kernel.org/r/20240710-x1e80100-crd-backlight-v1-0-eb242311a23e@xxxxxxxxxx
---
Stephan Gerhold (4):
dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
Revert "drm/panel-edp: Add SDC ATNA45AF01"
arm64: dts: qcom: x1e80100-crd: Fix backlight
arm64: defconfig: Add CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20
.../bindings/display/panel/samsung,atna33xc20.yaml | 8 +++++++-
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 17 +++++++++++++++--
arch/arm64/configs/defconfig | 1 +
drivers/gpu/drm/panel/panel-edp.c | 2 --
4 files changed, 23 insertions(+), 5 deletions(-)
---
base-commit: 91e3b24eb7d297d9d99030800ed96944b8652eaf
change-id: 20240710-x1e80100-crd-backlight-632f9bf936ef
Best regards,
--
Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>