[tip: irq/core] irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND

[tip-bot2 for Stefan Wahren]

The following commit has been merged into the irq/core branch of tip:

Commit-ID:     9a58480e5e532903f08b2a34f05076d3ec3a5c00
Gitweb:        https://git.kernel.org/tip/9a58480e5e532903f08b2a34f05076d3ec3a5c00
Author:        Stefan Wahren <wahrenst@xxxxxxx>
AuthorDate:    Sun, 30 Jun 2024 17:36:46 +02:00
Committer:     Thomas Gleixner <tglx@xxxxxxxxxxxxx>
CommitterDate: Mon, 15 Jul 2024 15:13:55 +02:00

irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND

The BCM2835 ARMCTRL interrupt controller doesn't provide any facility to
configure the wakeup sources. That's the reason why the driver lacks the
irq_set_wake() callback for the interrupt chip.

But this prevent to properly enter power management states like "suspend to
idle".

Enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so the
interrupt suspend logic can handle the chip correctly.

Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
---
 drivers/irqchip/irq-bcm2835.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index e94e288..6c20604 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -102,7 +102,9 @@ static void armctrl_unmask_irq(struct irq_data *d)
 static struct irq_chip armctrl_chip = {
 	.name = "ARMCTRL-level",
 	.irq_mask = armctrl_mask_irq,
-	.irq_unmask = armctrl_unmask_irq
+	.irq_unmask = armctrl_unmask_irq,
+	.flags = IRQCHIP_MASK_ON_SUSPEND |
+		 IRQCHIP_SKIP_SET_WAKE,
 };
 
 static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,