[PATCH 2/2] arm64: dts: qcom: sm8550-qrd: use the PMU to power up bluetooth

[Neil Armstrong]

Change the HW model in sm8550-qrd.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 774bdfcffec3..6052dd922ec5 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -219,13 +219,10 @@ wcn7850-pmu {
 		compatible = "qcom,wcn7850-pmu";
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>;
+		pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
 
 		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
-		/*
-		 * TODO Add bt-enable-gpios once the Bluetooth driver is
-		 * converted to using the power sequencer.
-		 */
+		bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 		vdd-supply = <&vreg_s5g_0p85>;
 		vddio-supply = <&vreg_l15b_1p8>;
@@ -1175,20 +1172,15 @@ &uart14 {
 	bluetooth {
 		compatible = "qcom,wcn7850-bt";
 
-		vddio-supply = <&vreg_l15b_1p8>;
-		vddaon-supply = <&vreg_s4e_0p95>;
-		vdddig-supply = <&vreg_s4e_0p95>;
-		vddrfa0p8-supply = <&vreg_s4e_0p95>;
-		vddrfa1p2-supply = <&vreg_s4g_1p25>;
-		vddrfa1p9-supply = <&vreg_s6g_1p86>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
 
 		max-speed = <3200000>;
-
-		enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
-		swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&bt_default>;
-		pinctrl-names = "default";
 	};
 };
 

-- 
2.34.1