Re: [PATCH 2/2] arm64: dts: qcom: sm8550-qrd: use the PMU to power up bluetooth

[Bartosz Golaszewski]

On Tue, Jul 16, 2024 at 11:45 AM Neil Armstrong
<neil.armstrong@xxxxxxxxxx> wrote:
>
> Change the HW model in sm8550-qrd.dts to a one closer to reality - where
> the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
> inside the package.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 26 +++++++++-----------------
>  1 file changed, 9 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> index 774bdfcffec3..6052dd922ec5 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> @@ -219,13 +219,10 @@ wcn7850-pmu {
>                 compatible = "qcom,wcn7850-pmu";
>
>                 pinctrl-names = "default";
> -               pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>;
> +               pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
>
>                 wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
> -               /*
> -                * TODO Add bt-enable-gpios once the Bluetooth driver is
> -                * converted to using the power sequencer.
> -                */
> +               bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
>
>                 vdd-supply = <&vreg_s5g_0p85>;
>                 vddio-supply = <&vreg_l15b_1p8>;
> @@ -1175,20 +1172,15 @@ &uart14 {
>         bluetooth {
>                 compatible = "qcom,wcn7850-bt";
>
> -               vddio-supply = <&vreg_l15b_1p8>;
> -               vddaon-supply = <&vreg_s4e_0p95>;
> -               vdddig-supply = <&vreg_s4e_0p95>;
> -               vddrfa0p8-supply = <&vreg_s4e_0p95>;
> -               vddrfa1p2-supply = <&vreg_s4g_1p25>;
> -               vddrfa1p9-supply = <&vreg_s6g_1p86>;
> +               vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +               vddaon-supply = <&vreg_pmu_aon_0p59>;
> +               vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +               vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +               vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +               vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +               vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
>
>                 max-speed = <3200000>;
> -
> -               enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
> -               swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
> -
> -               pinctrl-0 = <&bt_default>;
> -               pinctrl-names = "default";
>         };
>  };
>
>
> --
> 2.34.1
>

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>