Re: [PATCH v3 2/3] clk: qcom: dispcc-sm8650: add missing CLK_SET_RATE_PARENT flag

[neil . armstrong]

On 16/07/2024 15:44, Dmitry Baryshkov wrote:
> On Tue, 16 Jul 2024 at 15:32, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:
> > On 16/07/2024 13:20, Dmitry Baryshkov wrote:
> > > On Tue, Jul 16, 2024 at 11:05:22AM GMT, Neil Armstrong wrote:
> > > > Add the missing CLK_SET_RATE_PARENT for the byte0_div_clk_src
> > > > and byte1_div_clk_src, the clock rate should propagate to
> > > > the corresponding _clk_src.
> > > >
> > > > Fixes: 9e939f008338 ("clk: qcom: add the SM8650 Display Clock Controller driver")
> > > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > > > Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> > > > ---
> > > >    drivers/clk/qcom/dispcc-sm8650.c | 2 ++
> > > >    1 file changed, 2 insertions(+)
> > >
> > > This doesn't seem correct, the byte1_div_clk_src is a divisor, so the
> > > rate should not be propagated. Other platforms don't set this flag.
> >
> > Why not ? the disp_cc_mdss_byte1_clk_src has CLK_SET_RATE_PARENT and a div_table,
> > and we only pass DISP_CC_MDSS_BYTE1_CLK to the dsi controller.
>
> Yes, the driver sets byte_clk with the proper rate, then it sets
> byte_intf_clk, which results in a proper divisor.
> If we have CLK_SET_RATE_PARENT for byte1_div_clk_src, then setting
> byte_intf_clk rate will also result in a rate change for the byte_clk
> rate.
>
> Note, all other platforms don't set that flag for this reason (I think
> I had to remove it during sm8450 development for this reason).

Ack, I think this deserves a comment explaining this, I'll add it.

Thanks,
Neil