Re: [PATCH] dt-bindings: net: qcom,emac: convert to dtschema

[Rayyan Ansari]

On Wed Jul 17, 2024 at 5:39 PM BST, Rob Herring wrote:
> On Wed, Jul 17, 2024 at 10:09:27AM +0100, Rayyan Ansari wrote:
> > Convert the bindings for the Qualcomm EMAC Ethernet Controller from the
> > old text format to yaml.
> > 
> > Also move the phy node of the controller to be within an mdio block so
> > we can use mdio.yaml.
> > 
> > Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/net/qcom,emac.yaml    |  98 ++++++++++++++++
> >  .../devicetree/bindings/net/qcom-emac.txt     | 111 ------------------
> >  2 files changed, 98 insertions(+), 111 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/net/qcom,emac.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/net/qcom-emac.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/net/qcom,emac.yaml b/Documentation/devicetree/bindings/net/qcom,emac.yaml
> > new file mode 100644
> > index 000000000000..cef65130578f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/qcom,emac.yaml
> > @@ -0,0 +1,98 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +---
> > +$id: http://devicetree.org/schemas/net/qcom,emac.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm EMAC Gigabit Ethernet Controller
> > +
> > +maintainers:
> > +  - Timur Tabi <timur@xxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - const: qcom,fsm9900-emac
> > +      - enum:
> > +          - qcom,fsm9900-emac-sgmii
> > +          - qcom,qdf2432-emac-sgmii
>
> You just need a single enum for all 3 compatibles.
>  
> > +  reg:
> > +    minItems: 1
> > +    maxItems: 2
>
> Need to define what each entry is and perhaps constraints on when it 1 
> vs. 2 entries.
>
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +
> > +if:
> > +  properties:
> > +    compatible:
> > +      const: qcom,fsm9900-emac
> > +then:
> > +  allOf:
> > +    - $ref: ethernet-controller.yaml#
>
> This goes at the top level and the 'if' schema should be under the 
> 'allOf'.

Wouldn't this make ethernet-controller.yaml also be included for
emac-sgmii as well - which isn't a controller?

> > +  properties:
> > +    clocks:
> > +      minItems: 7
> > +      maxItems: 7
> > +
> > +    clock-names:
> > +      items:
> > +        - const: axi_clk
> > +        - const: cfg_ahb_clk
> > +        - const: high_speed_clk
> > +        - const: mdio_clk
> > +        - const: tx_clk
> > +        - const: rx_clk
> > +        - const: sys_clk
>
> Define these at the top level and then exclude them in the if schema.

Just clocks and clock-names? Why so, if sgmii does not require clocks?

> > +
> > +    internal-phy:
> > +      maxItems: 1
>
> This needs a type ref.
>
> > +
> > +    mdio:
> > +      $ref: mdio.yaml#
> > +      unevaluatedProperties: false
> > +
> > +  required:
> > +    - clocks
> > +    - clock-names
> > +    - internal-phy
> > +    - phy-handle
> > +    - mdio
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    emac0: ethernet@feb20000 {
>
> Drop unused labels.
>
> > +        compatible = "qcom,fsm9900-emac";
> > +        reg = <0xfeb20000 0x10000>,
> > +              <0xfeb36000 0x1000>;
> > +        interrupts = <76>;
> > +
> > +        clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
> > +                 <&gcc 6>, <&gcc 7>;
> > +        clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
> > +                      "mdio_clk", "tx_clk", "rx_clk", "sys_clk";
> > +
> > +        internal-phy = <&emac_sgmii>;
> > +        phy-handle = <&phy0>;
> > +
> > +        mdio {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            phy0: ethernet-phy@0 {
> > +                reg = <0>;
> > +            };
> > +        };
> > +    };
> > +
> > +    emac_sgmii: ethernet@feb38000 {
>
> This should be a separate entry. (You need '- |' above it.)

Should they not be part of one complete example, since the main node
requires a handle to the sgmii node with 'internal-phy'?

> > +        compatible = "qcom,fsm9900-emac-sgmii";
> > +        reg = <0xfeb38000 0x1000>;
> > +        interrupts = <80>;
> > +    };