[PATCH RFC v3 3/6] dt-bindings: phy: cp110-utmi-phy: add compatible string for armada-38x

From: Josua Mayer
Date: Sat Jul 20 2024 - 10:20:10 EST


Armada 38x USB-2.0 PHYs are similar to Armada 8K (CP110) and can be
supported by the same driver with small differences.

Add new compatible string for armada-38x variant of utmi phy.
Then add descriptions and names for two additional register definitions
that may be specified instead of a syscon phandle.

Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx>
---
.../phy/marvell,armada-cp110-utmi-phy.yaml | 34 ++++++++++++++++++----
1 file changed, 29 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
index 9ce7b4c6d208..246e48d51755 100644
--- a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
@@ -23,12 +23,36 @@ description:
UTMI PHY1 --------\
1.H----- USB HOST1

+ On Armada 380 there is an additional USB-2.0-only controller,
+ and an additional UTMI PHY respectively.
+ The USB device controller can only be connected to a single UTMI PHY port,
+ either UTMI PHY0 or UTMI PHY2.
+
+
+
properties:
compatible:
- const: marvell,cp110-utmi-phy
+ enum:
+ - marvell,a38x-utmi-phy
+ - marvell,cp110-utmi-phy

reg:
- maxItems: 1
+ anyOf:
+ - items:
+ - description: UTMI registers
+ - items:
+ - description: UTMI registers
+ - description: USB config register
+ - description: UTMI config registers
+
+ reg-names:
+ anyOf:
+ - items:
+ - const: utmi
+ - items:
+ - const: utmi
+ - const: usb-cfg
+ - const: utmi-cfg

"#address-cells":
const: 1
@@ -38,13 +62,14 @@ properties:

marvell,system-controller:
description:
- Phandle to the system controller node
+ Phandle to the system controller node.
+ Optional when usb-cfg and utmi-cfg regs are given.
$ref: /schemas/types.yaml#/definitions/phandle

# Required child nodes:

patternProperties:
- "^usb-phy@[0|1]$":
+ "^usb-phy@[0|1|2]$":
type: object
description:
Each UTMI PHY port must be represented as a sub-node.
@@ -68,7 +93,6 @@ required:
- reg
- "#address-cells"
- "#size-cells"
- - marvell,system-controller

additionalProperties: false


--
2.43.0