Re: [PATCH v2 2/2] arm64: dts: qcom: x1e80100-yoga: Update panel bindings

[Abel Vesa]

On 24-07-19 11:52:50, Rob Clark wrote:
> From: Rob Clark <robdclark@xxxxxxxxxxxx>
> 
> Use the correct panel compatible, and wire up enable-gpio.  It is wired
> up in the same way as the x1e80100-crd.
> 
> Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>

Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxx>

> ---
>  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts   | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> index f569f0fbd1fc..28a6ea5a24fd 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
> @@ -592,9 +592,13 @@ &mdss_dp3 {
>  
>  	aux-bus {
>  		panel {
> -			compatible = "edp-panel";
> +			compatible = "samsung,atna45dc02", "samsung,atna33xc20";
> +			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
>  			power-supply = <&vreg_edp_3p3>;
>  
> +			pinctrl-0 = <&edp_bl_en>;
> +			pinctrl-names = "default";
> +
>  			port {
>  				edp_panel_in: endpoint {
>  					remote-endpoint = <&mdss_dp3_out>;
> @@ -663,6 +667,13 @@ &pcie6a_phy {
>  	status = "okay";
>  };
>  
> +&pmc8380_3_gpios {
> +	edp_bl_en: edp-bl-en-state {
> +		pins = "gpio4";
> +		function = "normal";
> +	};
> +};
> +
>  &qupv3_0 {
>  	status = "okay";
>  };
> -- 
> 2.45.2
>