Re: [PATCH] platform/x86:dell-laptop: Add knobs to change battery charge settings

From: Pali Rohár
Date: Tue Jul 23 2024 - 03:30:31 EST

On Tuesday 23 July 2024 00:36:10 Andres Salomon wrote:
> On Mon, 22 Jul 2024 22:25:04 +0200
> Pali Rohár <pali@xxxxxxxxxx> wrote:
>
> > On Monday 22 July 2024 20:41:32 Pali Rohár wrote:
> > > On Monday 22 July 2024 14:34:32 Andres Salomon wrote:
> > > > On Mon, 22 Jul 2024 09:18:45 +0200
> > > > Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > >
> > > > > On Sunday 21 July 2024 19:58:51 Andres Salomon wrote:
> > > > > > On Mon, 22 Jul 2024 01:40:37 +0200
> > > > > > Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > > On Sunday 21 July 2024 19:37:16 Andres Salomon wrote:
> > > > > > > > On Sun, 21 Jul 2024 11:02:38 +0200
> > > > > > > > Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > > > > > >
> > > > > > > > > On Saturday 20 July 2024 22:06:06 Andres Salomon wrote:
> > > > > > > > > > On Sat, 20 Jul 2024 11:55:07 +0200
> > > > > > > > > > Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > > > > > > > >
> > > > > > > > > > > On Saturday 20 July 2024 05:24:19 Andres Salomon wrote:
> > > > > > > > > > > > Thanks for the quick feedback! Responses below.
> > > > > > > > > > > >
> > > > > > > > > > > > On Sat, 20 Jul 2024 10:40:19 +0200
> > > > > > > > > > > > Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > > > > > > > > > >
> > > > > > > >
> > > > > > > > [...]
> > > > > > > >
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > +static void __init dell_battery_init(struct device *dev)
> > > > > > > > > > > > > > +{
> > > > > > > > > > > > > > + enum battery_charging_mode current_mode = DELL_BAT_MODE_NONE;
> > > > > > > > > > > > > > +
> > > > > > > > > > > > > > + dell_battery_read_req(BAT_CUSTOM_MODE_TOKEN, (int *) &current_mode);
> > > > > > > > > > > > > > + if (current_mode != DELL_BAT_MODE_NONE) {
> > > > > > > > > > > > >
> > > > > > > > > > > > > I quite do not understand how is this code suppose to work.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Why is there mix of custom kernel enum battery_charging_mode and return
> > > > > > > > > > > > > value from Dell's API?
> > > > > > > > > > > >
> > > > > > > > > > > > This is from the original patch from Dell; tbh, I'm not sure. It does
> > > > > > > > > > > > work, though. That is, current_mode ends up holding the correct value
> > > > > > > > > > > > based on what was previously set, even if the charging mode is set from
> > > > > > > > > > > > the BIOS.
> > > > > > > > > > > >
> > > > > > > > > > > > I just scanned through the libsmbios code to see what it's doing, and
> > > > > > > > > > > > it appears to loop through every charging mode to check if its active.
> > > > > > > > > > > > I'm not really sure that makes much more sense, so I'll try some more
> > > > > > > > > > > > tests.
> > > > > > > > > > >
> > > > > > > > > > > Keyboard backlight code (kbd_get_first_active_token_bit) is doing also
> > > > > > > > > > > this type scan. If I remember correctly, for every keyboard backlight
> > > > > > > > > > > token we just know the boolean value - if the token is set or not.
> > > > > > > > > > >
> > > > > > > > > > > It would really nice to see what (raw) value is returned by the
> > > > > > > > > > > dell_battery_read_req(token) function for every battery token and for
> > > > > > > > > > > every initial state.
> > > > > > > > > >
> > > > > > > > > > I checked this. The BIOS sets the mode value in every related token
> > > > > > > > > > location. I'm still not really sure what libsmbios is doing, but the
> > > > > > > > > > kernel code seems to arbitrarily choose one of the token locations
> > > > > > > > > > to read from. This makes sense to me now.
> > > > > > > > > >
> > > > > > > > > > In the BIOS when I set the mode to "ExpressCharge",
> > > > > > > > > > this what I pulled for each token location:
> > > > > > > > > >
> > > > > > > > > > [ 5.704651] dell-laptop dell-laptop: BAT_CUSTOM_MODE_TOKEN value: 2
> > > > > > > > > > [ 5.707015] dell-laptop dell-laptop: BAT_PRI_AC_MODE_TOKEN value: 2
> > > > > > > > > > [ 5.709114] dell-laptop dell-laptop: BAT_ADAPTIVE_MODE_TOKEN value: 2
> > > > > > > > > > [ 5.711041] dell-laptop dell-laptop: BAT_STANDARD_MODE_TOKEN value: 2
> > > > > > > > > > [ 5.713705] dell-laptop dell-laptop: BAT_EXPRESS_MODE_TOKEN value: 2
> > > > > > > > > >
> > > > > > > > > > Similar story when I set it to Custom (all were '5'), or Standard ('1').
> > > > > > > > > > When I set it from linux as well, it changed all location values.
> > > > > > > > >
> > > > > > > > > Interesting... Anyway, I still think that the API could be similar to
> > > > > > > > > what is used in keyboard backlight.
> > > > > > > > >
> > > > > > > > > Could you please dump all information about each token? They are in
> > > > > > > > > struct calling_interface_token returned by dell_smbios_find_token.
> > > > > > > > >
> > > > > > > > > I'm interesting in tokenID, location and value.
> > > > > > > > >
> > > > > > > > > Ideally to compare what is in token->value and then in buffer.output[1]
> > > > > > > > > (in case dell_send_request does not fail).
> > > > > > > >
> > > > > > > >
> > > > > > > > Alright, here's what I see:
> > > > > > > >
> > > > > > > > [ 5.904775] dell_laptop: dell_battery_read_req: token requested: 0x343, tokenID=0x343, location=0x343, value=5
> > > > > > > > [ 5.908675] dell_laptop: dell_battery_read_req: buffer.output[1]=3
> > > > > > > > [ 5.908680] dell_laptop: dell_battery_init: BAT_CUSTOM_MODE_TOKEN value: 3
> > > > > > > > [ 5.908682] dell_laptop: dell_battery_read_req: token requested: 0x341, tokenID=0x341, location=0x341, value=3
> > > > > > > > [ 5.910922] dell_laptop: dell_battery_read_req: buffer.output[1]=3
> > > > > > > > [ 5.910926] dell_laptop: dell_battery_init: BAT_PRI_AC_MODE_TOKEN value: 3
> > > > > > > > [ 5.910928] dell_laptop: dell_battery_read_req: token requested: 0x342, tokenID=0x342, location=0x342, value=4
> > > > > > > > [ 5.913042] dell_laptop: dell_battery_read_req: buffer.output[1]=3
> > > > > > > > [ 5.913046] dell_laptop: dell_battery_init: BAT_ADAPTIVE_MODE_TOKEN value: 3
> > > > > > > > [ 5.913048] dell_laptop: dell_battery_read_req: token requested: 0x346, tokenID=0x346, location=0x346, value=1
> > > > > > > > [ 5.914996] dell_laptop: dell_battery_read_req: buffer.output[1]=3
> > > > > > > > [ 5.914999] dell_laptop: dell_battery_init: BAT_STANDARD_MODE_TOKEN value: 3
> > > > > > > > [ 5.915000] dell_laptop: dell_battery_read_req: token requested: 0x347, tokenID=0x347, location=0x347, value=2
> > > > > > > > [ 5.916723] dell_laptop: dell_battery_read_req: buffer.output[1]=3
> > > > > > > > [ 5.916724] dell_laptop: dell_battery_init: BAT_EXPRESS_MODE_TOKEN value: 3
> > > > > > > > [ 5.916725] dell_laptop: dell_battery_read_req: token requested: 0x349, tokenID=0x349, location=0x349, value=65535
> > > > > > > > [ 5.918727] dell_laptop: dell_battery_read_req: buffer.output[1]=65
> > > > > > > > [ 5.918731] dell_laptop: dell_battery_init: BAT_CUSTOM_CHARGE_START value: 65
> > > > > > > > [ 5.918734] dell_laptop: dell_battery_read_req: token requested: 0x34a, tokenID=0x34a, location=0x34a, value=65535
> > > > > > > > [ 5.920864] dell_laptop: dell_battery_read_req: buffer.output[1]=85
> > > > > > > > [ 5.920867] dell_laptop: dell_battery_init: BAT_CUSTOM_CHARGE_END value: 85
> > > > > > >
> > > > > > > Perfect. And can you check dumps when the mode is set to some other than BAT_PRI_AC_MODE_TOKEN?
> > > > > >
> > > > > > Here's Express:
> > > > > >
> > > > > > [ 5.880090] dell_laptop: dell_battery_read_req: token requested: 0x343, tokenID=0x343, location=0x343, value=5
> > > > > > [ 5.882011] dell_laptop: dell_battery_read_req: buffer.output[1]=2
> > > > > > [ 5.882014] dell_laptop: dell_battery_init: BAT_CUSTOM_MODE_TOKEN value: 2
> > > > > > [ 5.882016] dell_laptop: dell_battery_read_req: token requested: 0x341, tokenID=0x341, location=0x341, value=3
> > > > > > [ 5.894513] dell_laptop: dell_battery_read_req: buffer.output[1]=2
> > > > > > [ 5.894518] dell_laptop: dell_battery_init: BAT_PRI_AC_MODE_TOKEN value: 2
> > > > > > [ 5.894520] dell_laptop: dell_battery_read_req: token requested: 0x342, tokenID=0x342, location=0x342, value=4
> > > > > > [ 5.913870] dell_laptop: dell_battery_read_req: buffer.output[1]=2
> > > > > > [ 5.913874] dell_laptop: dell_battery_init: BAT_ADAPTIVE_MODE_TOKEN value: 2
> > > > > > [ 5.913875] dell_laptop: dell_battery_read_req: token requested: 0x346, tokenID=0x346, location=0x346, value=1
> > > > > > [ 5.915622] dell_laptop: dell_battery_read_req: buffer.output[1]=2
> > > > > > [ 5.915625] dell_laptop: dell_battery_init: BAT_STANDARD_MODE_TOKEN value: 2
> > > > > > [ 5.915626] dell_laptop: dell_battery_read_req: token requested: 0x347, tokenID=0x347, location=0x347, value=2
> > > > > > [ 5.917349] dell_laptop: dell_battery_read_req: buffer.output[1]=2
> > > > > > [ 5.917351] dell_laptop: dell_battery_init: BAT_EXPRESS_MODE_TOKEN value: 2
> > > > > > [ 5.917352] dell_laptop: dell_battery_read_req: token requested: 0x349, tokenID=0x349, location=0x349, value=65535
> > > > > > [ 5.919068] dell_laptop: dell_battery_read_req: buffer.output[1]=65
> > > > > > [ 5.919070] dell_laptop: dell_battery_init: BAT_CUSTOM_CHARGE_START value: 65
> > > > > > [ 5.919071] dell_laptop: dell_battery_read_req: token requested: 0x34a, tokenID=0x34a, location=0x34a, value=65535
> > > > > > [ 5.920780] dell_laptop: dell_battery_read_req: buffer.output[1]=85
> > > > > > [ 5.920782] dell_laptop: dell_battery_init: BAT_CUSTOM_CHARGE_END value: 85
> > > > > >
> > > > > > And here's Adaptive:
> > > > > >
> > > > > > [ 5.945319] dell_laptop: dell_battery_read_req: token requested: 0x343, tokenID=0x343, location=0x343, value=5
> > > > > > [ 5.973685] dell_laptop: dell_battery_read_req: buffer.output[1]=4
> > > > > > [ 5.973690] dell_laptop: dell_battery_init: BAT_CUSTOM_MODE_TOKEN value: 4
> > > > > > [ 5.973692] dell_laptop: dell_battery_read_req: token requested: 0x341, tokenID=0x341, location=0x341, value=3
> > > > > > [ 5.976533] dell_laptop: dell_battery_read_req: buffer.output[1]=4
> > > > > > [ 5.976538] dell_laptop: dell_battery_init: BAT_PRI_AC_MODE_TOKEN value: 4
> > > > > > [ 5.976540] dell_laptop: dell_battery_read_req: token requested: 0x342, tokenID=0x342, location=0x342, value=4
> > > > > > [ 5.981013] dell_laptop: dell_battery_read_req: buffer.output[1]=4
> > > > > > [ 5.981018] dell_laptop: dell_battery_init: BAT_ADAPTIVE_MODE_TOKEN value: 4
> > > > > > [ 5.981020] dell_laptop: dell_battery_read_req: token requested: 0x346, tokenID=0x346, location=0x346, value=1
> > > > > > [ 5.983474] dell_laptop: dell_battery_read_req: buffer.output[1]=4
> > > > > > [ 5.983479] dell_laptop: dell_battery_init: BAT_STANDARD_MODE_TOKEN value: 4
> > > > > > [ 5.983481] dell_laptop: dell_battery_read_req: token requested: 0x347, tokenID=0x347, location=0x347, value=2
> > > > > > [ 5.985881] dell_laptop: dell_battery_read_req: buffer.output[1]=4
> > > > > > [ 5.985885] dell_laptop: dell_battery_init: BAT_EXPRESS_MODE_TOKEN value: 4
> > > > > > [ 5.985887] dell_laptop: dell_battery_read_req: token requested: 0x349, tokenID=0x349, location=0x349, value=65535
> > > > > > [ 5.988332] dell_laptop: dell_battery_read_req: buffer.output[1]=65
> > > > > > [ 5.988337] dell_laptop: dell_battery_init: BAT_CUSTOM_CHARGE_START value: 65
> > > > > > [ 5.988339] dell_laptop: dell_battery_read_req: token requested: 0x34a, tokenID=0x34a, location=0x34a, value=65535
> > > > > > [ 5.990769] dell_laptop: dell_battery_read_req: buffer.output[1]=85
> > > > > > [ 5.990774] dell_laptop: dell_battery_init: BAT_CUSTOM_CHARGE_END value: 85
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > I'm available for contract & employment work, see:
> > > > > > https://spindle.queued.net/~dilinger/resume-tech.pdf
> > > > >
> > > > > Nice! So it is exactly same as API of keyboard backlight tokens. Thanks.
> > > > >
> > > > > In dell_battery_write_req function you can drop second "val" argument
> > > > > and replace it by token->value. So the dell_fill_request call in that
> > > > > function would look like:
> > > > >
> > > > > dell_fill_request(&buffer, token->location, token->value, 0, 0);
> > > >
> > > >
> > > > Well, except that we use dell_battery_write_req for writing the charge
> > > > start/end values as well (in dell_battery_custom_set). Those can't be
> > > > obtained from token->value.
> > > >
> > > > We could have two separate functions for that, or set 'val' to a
> > > > sentinel value (0) that, if detected, we set val=token->value. I'm
> > > > still not really understanding the point, though.
> > >
> > > I think that two separate functions would be needed. One which set
> > > battery mode (enum) and which set custom thresholds.
> > >
> > > > >
> > > > > And then you can mimic the usage as it is done in keyboard backlight
> > > > > functions (kbd_get_first_active_token_bit).
> > > > >
> > > > > If you do not know what I mean then later (today or tomorrow) I can
> > > > > write code example of the functionality.
> > > >
> > > > Sorry, I still don't understand what the goal is here. Is the goal to
> > > > not pull from a random location to determine the current charging mode?
> > > > Is the goal to determine what charging modes are currently supported
> > > > (and if so, I don't see how)? Is the goal to avoid having the kernel
> > > > hardcode a list of enums that the BIOS might have different values
> > > > for? Is the goal to merge the keyboard backlight and battery setting
> > > > functions?
> > >
> > > Avoid having the kernel hardcoded values for enums which SMBIOS
> > > provides. Future (or maybe also older) modes may have different enum
> > > values. So we should use what SMBIOS provides to us.
> > >
> > > Also to determinate which charging modes are supported by the current HW
> > > configuration. If BIOS does not support some mode or does not allow to
> > > set some mode, kernel should not export this as supported option.
> > >
> > > If you do not see how to do it, please give me some time, I will send
> > > you an example. Going to look at it right now.
> > >
> > > Merging keyboard backlight and battery code is bonus, not required.
> > > But I thought that it would be easier to build a new code from common
> > > blocks.
> >
> > Here is very quick & hacky example of what I mean (completely untested):
> >
> > --- dell-laptop.c
> > +++ dell-laptop.c
> > @@ -353,6 +353,105 @@ static const struct dmi_system_id dell_q
> > { }
> > };
> >
> > +static int dell_read_token_value(u16 tokenid, u32 *value)
> > +{
> > + struct calling_interface_buffer buffer;
> > + struct calling_interface_token *token;
> > + int ret;
> > +
> > + token = dell_smbios_find_token(tokenid);
> > + if (!token)
> > + return -ENODEV;
> > +
> > + dell_fill_request(&buffer, token->location, 0, 0, 0);
> > + ret = dell_send_request(&buffer, CLASS_TOKEN_READ, SELECT_TOKEN_STD);
> > + if (ret)
> > + return ret;
> > +
> > + *value = buffer.output[1];
> > + return 0;
> > +}
> > +
> > +static int dell_write_token_value(u16 tokenid, u32 value)
> > +{
> > + struct calling_interface_buffer buffer;
> > + struct calling_interface_token *token;
> > +
> > + token = dell_smbios_find_token(type);
> > + if (!token)
> > + return -ENODEV;
> > +
> > + dell_fill_request(&buffer, token->location, value, 0, 0);
> > + return dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
> > +}
> > +
>
> I did things a bit differently here. I created a function
> dell_send_request_by_token_loc() that is available to be reused by all
> the code that sends packets to token->location. This is available for
> kbd_{g,s}et_token_bit(), micmute_led_set(), and mute_led_set() to use,
> but I'd rather do that in a separate patch.

Ok, nice thing.

> +static int dell_send_request_by_token_loc(struct calling_interface_buffer *buffer,
> + u16 class, u16 select, int type,
> + int val)
> +{
> + struct calling_interface_token *token;
> +
> + token = dell_smbios_find_token(type);
> + if (!token)
> + return -ENODEV;
> +
> + if (val <= 0)

I would be rather very careful here. Zero value can be valid value for
some future call. It would be better to pass -1 or something like that.

And IIRC dell_fill_request take u32 as val. So maybe it would be better
to change "int val" to "u32 val" and interpret (u32)-1 as enum value
from token->value?

> + val = token->value;
> +
> + dell_fill_request(buffer, token->location, val, 0, 0);
> + return dell_send_request(buffer, class, select);
> +}
> +
> +static int dell_battery_set_mode(const int type)
> +{
> + struct calling_interface_buffer buffer;
> +
> + /* 0 means use the value from the token */
> + return dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_WRITE,
> + SELECT_TOKEN_STD, type, 0);
> +}
> +
> +static int dell_battery_read(const int type)
> +{
> + struct calling_interface_buffer buffer;
> + int err;
> +
> + err = dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_READ,
> + SELECT_TOKEN_STD, type, 0);
> + if (err)
> + return err;
> +
> + return buffer.output[1];
> +}
>
>
>
> > +static int dell_is_enum_token_active(u16 tokenid)
> > +{
> > + struct calling_interface_buffer buffer;
> > + struct calling_interface_token *token;
> > + int ret;
> > +
> > + token = dell_smbios_find_token(tokenid);
> > + if (!token)
> > + return -EINVAL;
> > +
> > + if (token->value == (u16)-1)
> > + return -EINVAL;
> > +
> > + dell_fill_request(&buffer, token->location, 0, 0, 0);
> > + ret = dell_send_request(&buffer, CLASS_TOKEN_READ, SELECT_TOKEN_STD);
> > + if (ret)
> > + return ret;
> > +
> > + return (buffer.output[1] == token->value);
> > +}
> > +
>
> Okay, I incorporated this, but using the above helper functions:
>
> +static bool dell_battery_mode_is_active(const int type)
> +{
> + struct calling_interface_token *token;
> +
> + token = dell_smbios_find_token(type);
> + if (!token)
> + return false;
> +
> + return token->value == dell_battery_read(type);
> +}
>
> It will look up the token twice, but this only happens once on it
> (and I'm realizing now that it can be marked __init).

Ok. Anyway if you are touching kbd code, exactly same function would be
required for it.

>
> > +static int dell_activate_enum_token(u16 tokenid)
> > +{
> > + struct calling_interface_buffer buffer;
> > + struct calling_interface_token *token;
> > + int ret;
> > +
> > + token = dell_smbios_find_token(tokenid);
> > + if (!token)
> > + return -EINVAL;
> > +
> > + if (token->value == (u16)-1)
> > + return -EINVAL;
> > +
> > + dell_fill_request(&buffer, token->location, token->value, 0, 0);
> > + return dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
> > +}
> > +
> > +static u32 dell_get_supported_enum_tokens(const u16 *tokenids, u32 count)
> > +{
> > + u32 supported_mask = 0;
> > + u32 i;
> > +
> > + for (i = 0; i < count; i++) {
> > + if (dell_smbios_find_token(tokenids[i]))
> > + supported_mask |= BIT(i);
> > + }
> > +
> > + return supported_mask;
> > +}
> > +
> > +static int dell_get_active_enum_token(const u16 *tokenids, u32 count, u32 supported_mask)
> > +{
> > + int ret;
> > + u32 i;
> > +
> > + for (i = 0; i < count; i++) {
> > + if (!(supported_mask & BIT(i)))
> > + continue;
> > + ret = dell_is_enum_token_active(tokenids[i]);
> > + if (ret == 1)
> > + return i;
> > + }
> > +
> > + return -EINVAL;
> > +}
>
>
> Thanks, I incorporated and tested this code; though it only runs once
> during init, because I'm keeping the battery_cur_mode variable (see
> next section).
>
> +static u32 __init battery_get_supported_modes(void)
> +{
> + u32 modes = 0;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(battery_modes); i++) {
> + if (dell_smbios_find_token(battery_modes[i].token))
> + modes |= BIT(i);
> + }
> +
> + return modes;
> +}
> +
> +static int __init dell_battery_find_charging_mode(void)
> +{
> + int i;
> +
> + battery_supported_modes = battery_get_supported_modes();
> + for (i = 0; i < ARRAY_SIZE(battery_modes); i++) {
> + if (!(battery_supported_modes & BIT(i)))
> + continue;
> + if (dell_battery_mode_is_active(battery_modes[i].token))
> + return battery_modes[i].token;
> + }
> +
> + return 0;
> +}
>
>
>
> > +
> > /*
> > * Derived from information in smbios-wireless-ctl:
> > *
> > @@ -2183,6 +2282,144 @@ static struct led_classdev mute_led_cdev
> > .default_trigger = "audio-mute",
> > };
> >
> > +static const u16 battery_mode_tokens[] = {
> > + BAT_STANDARD_MODE_TOKEN,
> > + BAT_EXPRESS_MODE_TOKEN,
> > + BAT_PRI_AC_MODE_TOKEN,
> > + BAT_ADAPTIVE_MODE_TOKEN,
> > + BAT_CUSTOM_MODE_TOKEN,
> > +};
> > +
> > +static const char * const battery_mode_names[] = {
> > + "standard",
> > + "express",
> > + "primarily_ac",
> > + "adaptive",
> > + "custom",
> > +};
> > +
> > +static u32 battery_mode_token_mask;
> > +
>
> I merged the token and name lists. Also, is there any particular reason
> you dropped the current mode, preferring to read it from SMBIOS every time
> in the _show() callback?

Yes, there is one important reason: You can change current mode from
userspace. We had this problem also with other functionality in driver.
So caching is not a good idea. There are/were enterprise Dell CCTK tools
for managing configuration of Dell machines. And usage of these tools
can break kernel driver.

> +static const struct {
> + int token;
> + const char *label;
> +} battery_modes[] = {
> + { BAT_STANDARD_MODE_TOKEN, "standard" },
> + { BAT_EXPRESS_MODE_TOKEN, "express" },
> + { BAT_PRI_AC_MODE_TOKEN, "primarily_ac" },
> + { BAT_ADAPTIVE_MODE_TOKEN, "adaptive" },
> + { BAT_CUSTOM_MODE_TOKEN, "custom" },
> +};
> +static u32 battery_supported_modes;
> +static int battery_cur_mode;
> +
>
>
>
> > +static int dell_battery_read_custom_charge(u16 token)
> > +{
> > + u32 value;
> > + int ret;
> > +
> > + ret = dell_read_token_value(token, &value);
> > + if (ret)
> > + return ret;
> > + if (value > 100)
> > + return -EINVAL;
> > + return value;
> > +}
> > +
> > +#define CHARGE_START_MIN 50
> > +#define CHARGE_START_MAX 95
> > +#define CHARGE_END_MIN 55
> > +#define CHARGE_END_MAX 100
> > +#define CHARGE_MIN_DIFF 5
> > +
> > +static int dell_battery_set_custom_charge_start(int val)
> > +{
> > + int end;
> > +
> > + if (val < CHARGE_START_MIN)
> > + val = CHARGE_START_MIN;
> > + else if (val > CHARGE_START_MAX)
> > + val = CHARGE_START_MAX;
> > +
> > + end = dell_battery_get_custom_charge(BAT_CUSTOM_CHARGE_END);
> > + if (end < 0)
> > + return end;
> > +
> > + if (end - val < CHARGE_MIN_DIFF)
> > + val = end - CHARGE_MIN_DIFF;
> > +
> > + return dell_write_token_value(BAT_CUSTOM_CHARGE_START, val);
> > +}
> > +
> > +static int dell_battery_set_custom_charge_end(int val)
> > +{
> > + int start;
> > +
> > + if (val < CHARGE_END_MIN)
> > + val = CHARGE_END_MIN;
> > + else if (val > CHARGE_END_MAX)
> > + val = CHARGE_END_MAX;
> > +
> > + start = dell_battery_get_custom_charge(BAT_CUSTOM_CHARGE_START);
> > + if (start < 0)
> > + return start;
> > +
> > + if (val - start < CHARGE_MIN_DIFF)
> > + val = start + CHARGE_MIN_DIFF;
> > +
> > + return dell_write_token_value(BAT_CUSTOM_CHARGE_END, val);
> > +}
> > +
>
>
> Good call, I split apart the start/end functions. It was originally
> much smaller and grew over time. :)
>
>
> > +static ssize_t charge_type_show(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + int active;
> > + ssize_t count;
> > +
> > + active = dell_get_active_enum_token(battery_mode_tokens, ARRAY_SIZE(battery_mode_tokens), battery_mode_token_mask);
> > + if (active < 0)
> > + return ret;
> > +
> > + for (count = 0, i = 0; i < ARRAY_SIZE(battery_mode_names); i++) {
> > + if (!(BIT(i) & battery_mode_token_mask))
> > + continue;
> > + count += sysfs_emit_at(buf, count, i == active ? "[%s] " : "%s ", battery_mode_names[mode]);
> > + }
> > +
> > + /* convert the last space to a newline */
> > + /* battery_mode_names is non-empty and battery_mode_token_mask is non-zero, so count is also non-zero */
> > + count--;
> > + count += sysfs_emit_at(buf, count, "\n");
> > +
> > + return count;
> > +}
> > +
>
> Again, I personally prefer keeping the currently active charging mode
> around as a variable:
>
>
> +static ssize_t charge_type_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + ssize_t count = 0;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(battery_modes); i++) {
> + if (!(battery_supported_modes & BIT(i)))
> + continue;
> +
> + count += sysfs_emit_at(buf, count,
> + battery_modes[i].token == battery_cur_mode ? "[%s] " : "%s ",
> + battery_modes[i].label);
> + }
> +
> + /* convert the last space to a newline */
> + if (count > 0)
> + count--;
> + count += sysfs_emit_at(buf, count, "\n");
> +
> + return count;
> +}
>
>
> > +static ssize_t charge_type_store(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t size)
> > +{
> > + size_t i;
> > + int ret;
> > +
> > + for (i = 0; i < ARRAY_SIZE(battery_mode_names); i++) {
> > + if (sysfs_streq(battery_mode_names[i], buf))
> > + break;
> > + }
> > +
> > + if (i >= ARRAY_SIZE(battery_mode_names))
> > + return -EINVAL;
> > +
> > + if (!(BIT(i) & battery_mode_token_mask))
> > + return -EINVAL;
> > +
> > + ret = dell_activate_enum_token(battery_mode_tokens[i]);
> > + if (ret)
> > + return ret;
> > +
> > + return size;
> > +}
> > +
> > +static void __init dell_battery_init(struct device *dev)
> > +{
> > + battery_mode_token_mask = dell_get_supported_enum_tokens(battery_mode_tokens, ARRAY_SIZE(battery_mode_tokens));
> > + if (battery_mode_token_mask != 0)
> > + battery_hook_register(&dell_battery_hook);
> > +}
> > +
> > +static void __exit dell_battery_exit(void)
> > +{
> > + if (battery_mode_token_mask != 0)
> > + battery_hook_unregister(&dell_battery_hook);
> > +}
> > +
> > static int __init dell_init(void)
> > {
> > struct calling_interface_token *token;
>
>
> Let me know your thoughts, and I can send a V2 patch if you're okay
> with the code snippets I sent.
>
> --
> I'm available for contract & employment work, see:
> https://spindle.queued.net/~dilinger/resume-tech.pdf