Re: [PATCH 3/3] ARM: dts: qcom: pma8084: add pon node

[Dmitry Baryshkov]

On Mon, Jul 22, 2024 at 12:47:57PM GMT, Rayyan Ansari wrote:
> Wrap existing pwrkey node inside a pon node, to conform to dt schema.
> 
> Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom/pma8084.dtsi | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
> index 2985f4805b93..dbf7afcbfd8b 100644
> --- a/arch/arm/boot/dts/qcom/pma8084.dtsi
> +++ b/arch/arm/boot/dts/qcom/pma8084.dtsi
> @@ -19,12 +19,16 @@ rtc@6000 {
>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>  		};
>  
> -		pwrkey@800 {
> -			compatible = "qcom,pm8941-pwrkey";
> +		pon@800 {
> +			compatible = "qcom,pm8941-pon";
>  			reg = <0x800>;
> -			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> -			debounce = <15625>;
> -			bias-pull-up;
> +
> +			pwrkey {
> +				compatible = "qcom,pm8941-pwrkey";
> +				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +			};

It might be worth adding the resin node too, see pm8941.dtsi

>  		};
>  
>  		pma8084_gpios: gpio@c000 {
> 
> -- 
> 2.45.2
> 

-- 
With best wishes
Dmitry