[PATCH v2 4/5] i3c: mipi-i3c-hci: Add a quirk to set timing parameters

[Shyam Sundar S K]

The AMD HCI controller is currently unstable at 12.5 MHz. To address this,
a quirk is added to configure the clock rate to 9 MHz as a workaround,
with proportional adjustments to the Open-Drain (OD) and Push-Pull (PP)
values.

Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@xxxxxxx>
Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@xxxxxxx>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
---
 drivers/i3c/master/mipi-i3c-hci/core.c       |  4 ++
 drivers/i3c/master/mipi-i3c-hci/hci.h        |  2 +
 drivers/i3c/master/mipi-i3c-hci/hci_quirks.c | 43 ++++++++++++++++++++
 3 files changed, 49 insertions(+)
 create mode 100644 drivers/i3c/master/mipi-i3c-hci/hci_quirks.c

diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index ca9d4e2c80e6..3320e6331c86 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -783,6 +783,10 @@ static int i3c_hci_init(struct i3c_hci *hci)
 		return ret;
 	}
 
+	/* Configure OD and PP timings for AMD platforms */
+	if (hci->quirks & HCI_QUIRK_AMD_OD_PP_TIMING)
+		amd_set_od_pp_timing(hci);
+
 	return 0;
 }
 
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index 8e5af4e55de1..06a4d54a5a02 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -141,6 +141,7 @@ struct i3c_hci_dev_data {
 /* list of quirks */
 #define HCI_QUIRK_RAW_CCC	BIT(1)	/* CCC framing must be explicit */
 #define HCI_QUIRK_AMD_PIO_MODE		BIT(2)  /* Set PIO mode for AMD platforms */
+#define HCI_QUIRK_AMD_OD_PP_TIMING	BIT(3)	/* Set OD and PP timings for AMD platforms */
 
 
 /* global functions */
@@ -149,5 +150,6 @@ void mipi_i3c_hci_pio_reset(struct i3c_hci *hci);
 void mipi_i3c_hci_dct_index_reset(struct i3c_hci *hci);
 
 void amd_i3c_hci_quirks_init(struct i3c_hci *hci);
+void amd_set_od_pp_timing(struct i3c_hci *hci);
 
 #endif
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c b/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c
new file mode 100644
index 000000000000..6ce08f9c92a8
--- /dev/null
+++ b/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * I3C HCI quirks
+ *
+ * Copyright 2024 Advanced Micro Devices, Inc.
+ *
+ * Authors: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
+ *          Guruvendra Punugupati <Guruvendra.Punugupati@xxxxxxx>
+ */
+
+#include <linux/i3c/master.h>
+#include "hci.h"
+
+/* Timing registers */
+#define HCI_SCL_I3C_OD_TIMING		0x214
+#define HCI_SCL_I3C_PP_TIMING		0x218
+#define HCI_SDA_HOLD_SWITCH_DLY_TIMING	0x230
+
+/* Timing values to configure 9MHz frequency */
+#define AMD_SCL_I3C_OD_TIMING		0x00cf00cf
+#define AMD_SCL_I3C_PP_TIMING		0x00160016
+
+void amd_i3c_hci_quirks_init(struct i3c_hci *hci)
+{
+#if defined(CONFIG_X86)
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
+		hci->quirks |= HCI_QUIRK_AMD_PIO_MODE;
+		hci->quirks |= HCI_QUIRK_AMD_OD_PP_TIMING;
+	}
+#endif
+}
+
+void amd_set_od_pp_timing(struct i3c_hci *hci)
+{
+	u32 data;
+
+	reg_write(HCI_SCL_I3C_OD_TIMING, AMD_SCL_I3C_OD_TIMING);
+	reg_write(HCI_SCL_I3C_PP_TIMING, AMD_SCL_I3C_PP_TIMING);
+	data = reg_read(HCI_SDA_HOLD_SWITCH_DLY_TIMING);
+	/* Configure maximum TX hold time */
+	data |= W0_MASK(18, 16);
+	reg_write(HCI_SDA_HOLD_SWITCH_DLY_TIMING, data);
+}
-- 
2.25.1