[PATCH 07/14] arm64: dts: freescale: imx93-tqma9352-mba93xxla: add irq for temp sensor

[Alexander Stein]

From: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>

This adds muxing and configuration of the irq output of the temp
sensor on TQMa93xx that is connected to a GPIO line on MBa93xxLA

While at it, add comment for RTC_EVENT for pcf85063 since the IRQ line
of both devices on SoM are routed to CPU GPIO on MBa93xxLA.

Signed-off-by: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
 .../boot/dts/freescale/imx93-tqma9352-mba93xxla.dts    | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index c663b6585c3a..3038c94a1184 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -452,13 +452,21 @@ &lpuart8 {
 };
 
 &pcf85063 {
-	/* RTC_EVENT# is connected on MBa93xxLA */
+	/* RTC_EVENT# from SoM is connected on mainboard */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcf85063>;
 	interrupt-parent = <&gpio1>;
 	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
 };
 
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_temp_sensor_som>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &tpm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tpm5>;
-- 
2.34.1