[PATCH v11 1/9] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
From: Witold Sadowski
Date: Wed Jul 24 2024 - 11:48:18 EST
Add new bindings for the v2 Marvell xSPI overlay: marvell,cn10-xspi-nor
compatible string. This new compatible string distinguishes between the
original and modified xSPI block.
Also add an optional base for the xfer register set with an additional
reg field to allocate the xSPI Marvell overlay XFER block.
Signed-off-by: Witold Sadowski <wsadowski@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../devicetree/bindings/spi/cdns,xspi.yaml | 32 ++++++++++++++++---
1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
index eb0f92468185..38a5795589de 100644
--- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -15,24 +15,27 @@ description: |
single, dual, quad or octal wire transmission modes for
read/write access to slaves such as SPI-NOR flash.
-allOf:
- - $ref: spi-controller.yaml#
-
properties:
compatible:
- const: cdns,xspi-nor
+ enum:
+ - cdns,xspi-nor
+ - marvell,cn10-xspi-nor
reg:
items:
- description: address and length of the controller register set
- description: address and length of the Slave DMA data port
- description: address and length of the auxiliary registers
+ - description: address and length of the xfer registers
+ minItems: 3
reg-names:
items:
- const: io
- const: sdma
- const: aux
+ - const: xfer
+ minItems: 3
interrupts:
maxItems: 1
@@ -42,6 +45,27 @@ required:
- reg
- interrupts
+allOf:
+ - $ref: spi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,cn10-xspi-nor
+ then:
+ properties:
+ reg:
+ minItems: 4
+ reg-names:
+ minItems: 4
+ else:
+ properties:
+ reg:
+ maxItems: 3
+ reg-names:
+ maxItems: 3
+
unevaluatedProperties: false
examples:
--
2.43.0