[PATCH v2 08/11] arm64: dts: qcom: sm6115-pro1x: Add PMI632 Type-C property

[Dang Huynh]

The USB-C port is used for powering external devices and transfer
data from/to them.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 51 +++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 5dd70dc87328..17f40125cb29 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -7,8 +7,10 @@
 
 #include "sm6115.dtsi"
 #include "pm6125.dtsi"
+#include "pmi632.dtsi"
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "F(x)tec Pro1X (QX1050)";
@@ -185,6 +187,46 @@ vol_up_n: vol-up-n-state {
 	};
 };
 
+&pmi632_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pmi632_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pmi632_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pmi632_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1000000>;
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -431,9 +473,8 @@ &usb {
 	status = "okay";
 };
 
-&usb_dwc3 {
-	/delete-property/ usb-role-switch;
-	dr_mode = "peripheral";
+&usb_dwc3_hs {
+	remote-endpoint = <&pmi632_hs_in>;
 };
 
 &usb_hsphy {
@@ -449,6 +490,10 @@ &usb_qmpphy {
 	status = "okay";
 };
 
+&usb_qmpphy_out {
+	remote-endpoint = <&pmi632_ss_in>;
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };

-- 
2.45.2