Re: [PATCH v2 1/2] dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA

[Manivannan Sadhasivam]

On Tue, Jul 23, 2024 at 06:49:31PM +0530, Mrinmay Sarkar wrote:
> The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
> bit. This is apparently masking those particular interrupts rather than
> unmasking the same. If the interrupts are masked, they would never get
> triggered.
> 
> So fix the issue by unmasking the STOP and ABORT interrupts properly.
> 
> Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
> cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

- Mani

> ---
>  drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> index 10e8f07..fa89b3a 100644
> --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
> +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> @@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
>  	if (first) {
>  		/* Enable engine */
>  		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
> -		/* Interrupt enable&unmask - done, abort */
> -		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
> -		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
> -		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
> +		/* Interrupt unmask - STOP, ABORT */
> +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
> +		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
> +		/* Interrupt enable - STOP, ABORT */
> +		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
>  		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
>  			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
>  		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
> -- 
> 2.7.4
> 

-- 
மணிவண்ணன் சதாசிவம்