[PATCH v2 1/2] dt-bindings: timer: ti,davinci-timer: convert to dtschema

[Kousik Sanagavarapu]

Convert txt binding of TI's DaVinci timer to dtschema to allow for
validation.

While at it, change the file name to match the compatible.

Signed-off-by: Kousik Sanagavarapu <five231003@xxxxxxxxx>
---
 .../bindings/timer/ti,da830-timer.yaml        | 68 +++++++++++++++++++
 .../bindings/timer/ti,davinci-timer.txt       | 37 ----------
 2 files changed, 68 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/timer/ti,da830-timer.yaml
 delete mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt

diff --git a/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml b/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml
new file mode 100644
index 000000000000..e9646f4e86cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,da830-timer.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ti,da830-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DaVinci Timer
+
+maintainers:
+  - Kousik Sanagavarapu <five231003@xxxxxxxxx>
+
+description: |
+  This is a 64-bit timer found on TI's DaVinci architecture devices. The timer
+  can be configured as a general-purpose 64-bit timer, dual general-purpose
+  32-bit timers. When configured as dual 32-bit timers, each half can operate
+  in conjunction (chain mode) or independently (unchained mode) of each other.
+
+  The timer is a free running up-counter and can generate interrupts when the
+  counter reaches preset counter values.
+
+properties:
+  compatible:
+    const: ti,da830-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 10
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: tint12
+      - const: tint34
+      - const: cmpint0
+      - const: cmpint1
+      - const: cmpint2
+      - const: cmpint3
+      - const: cmpint4
+      - const: cmpint5
+      - const: cmpint6
+      - const: cmpint7
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@20000 {
+        compatible = "ti,da830-timer";
+        reg = <0x20000 0x1000>;
+        interrupts = <21>, <22>;
+        interrupt-names = "tint12", "tint34";
+        clocks = <&pll0_auxclk>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
deleted file mode 100644
index 29bf91ccf5b7..000000000000
--- a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Device tree bindings for Texas Instruments DaVinci timer
-
-This document provides bindings for the 64-bit timer in the DaVinci
-architecture devices. The timer can be configured as a general-purpose 64-bit
-timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
-timers, each half can operate in conjunction (chain mode) or independently
-(unchained mode) of each other.
-
-The timer is a free running up-counter and can generate interrupts when the
-counter reaches preset counter values.
-
-Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
-watchdog timers.
-
-Required properties:
-
-- compatible : should be "ti,da830-timer".
-- reg : specifies base physical address and count of the registers.
-- interrupts : interrupts generated by the timer.
-- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
-		   "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
-		   "cmpint7" ("cmpintX" may be omitted if not present in the
-		   hardware).
-- clocks : the clock feeding the timer clock.
-
-Example:
-
-	clocksource: timer@20000 {
-		compatible = "ti,da830-timer";
-		reg = <0x20000 0x1000>;
-		interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
-			     <80>, <81>;
-		interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
-				  "cmpint2", "cmpint3", "cmpint4", "cmpint5",
-				  "cmpint6", "cmpint7";
-		clocks = <&pll0_auxclk>;
-	};
-- 
2.45.2.827.g557ae147e6.dirty