[PATCH 0/5] ad7380: add support for single-ended parts

[Julien Stephan]

This series will add support for ad7386/7/8 (16/14/12 bits) unsigned,
dual simultaneous sampling, single-ended compatible parts, and the
corresponding ad7386-4/7-4/8-4 4 channels to ad7380 driver.

These parts have a 2:1 multiplexer in front of each ADC. They also include
additional configuration registers that allow for either manual selection
or automatic switching (sequencer mode), of the multiplexer inputs.

>From an IIO point of view, all inputs are exported, i.e ad7386/7/8
export 4 channels and ad7386-4/7-4/8-4 export 8 channels.

Inputs AinX0 of multiplexers correspond to the first half of IIO channels
(i.e 0-1 or 0-3) and inputs AinX1 correspond to second half (i.e 2-3 or
4-7). Example for AD7386/7/8 (2 channels parts):

          IIO   | AD7386/7/8
                |         +----------------------------
                |         |     _____        ______
                |         |    |     |      |      |
       voltage0 | AinA0 --|--->|     |      |      |
                |         |    | mux |----->| ADCA |---
       voltage2 | AinA1 --|--->|     |      |      |
                |         |    |_____|      |_____ |
                |         |     _____        ______
                |         |    |     |      |      |
       voltage1 | AinB0 --|--->|     |      |      |
                |         |    | mux |----->| ADCB |---
       voltage3 | AinB1 --|--->|     |      |      |
                |         |    |_____|      |______|
                |         |
                |         +----------------------------

To ease the review, this series is split on several commits, in
particular, sequencer mode is added as an additional commit.

Cheers
Julien

Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
---
Julien Stephan (5):
      dt-bindings: iio: adc: ad7380: add single-ended compatible parts
      ad7380: prepare driver for single-ended parts support
      ad7380: add support for single-ended parts
      ad7380: enable sequencer for single-ended parts
      docs: iio: ad7380: add support for single-ended parts

 .../devicetree/bindings/iio/adc/adi,ad7380.yaml    |  13 +
 Documentation/iio/ad7380.rst                       |  42 ++
 drivers/iio/adc/ad7380.c                           | 511 +++++++++++++++++----
 3 files changed, 488 insertions(+), 78 deletions(-)
---
base-commit: 472438c7e0e2261c6737a8321f46ef176eef1c8f
change-id: 20240726-ad7380-add-single-ended-chips-b437d1cc8b8b

Best regards,
-- 
Julien Stephan <jstephan@xxxxxxxxxxxx>