[PATCH AUTOSEL 6.6 08/17] MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a
From: Sasha Levin
Date: Sun Jul 28 2024 - 12:18:24 EST
From: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
[ Upstream commit d89a415ff8d5e0aad4963f2d8ebb0f9e8110b7fa ]
Add various required properties to silent warnings:
arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi:116.16-297.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
Signed-off-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../boot/dts/loongson/loongson64-2k1000.dtsi | 37 +++++++++++++++----
1 file changed, 30 insertions(+), 7 deletions(-)
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index ee3e2153dd13f..b5593f7cc383b 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -118,7 +118,6 @@ pci@1a000000 {
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <2>;
reg = <0 0x1a000000 0 0x02000000>,
<0xfe 0x00000000 0 0x20000000>;
@@ -204,93 +203,117 @@ sata@8,0 {
interrupt-parent = <&liointc0>;
};
- pci_bridge@9,0 {
+ pcie@9,0 {
compatible = "pci0014,7a19.0",
"pci0014,7a19",
"pciclass060400",
"pciclass0604";
reg = <0x4800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@a,0 {
+ pcie@a,0 {
compatible = "pci0014,7a09.0",
"pci0014,7a09",
"pciclass060400",
"pciclass0604";
reg = <0x5000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@b,0 {
+ pcie@b,0 {
compatible = "pci0014,7a09.0",
"pci0014,7a09",
"pciclass060400",
"pciclass0604";
reg = <0x5800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@c,0 {
+ pcie@c,0 {
compatible = "pci0014,7a09.0",
"pci0014,7a09",
"pciclass060400",
"pciclass0604";
reg = <0x6000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@d,0 {
+ pcie@d,0 {
compatible = "pci0014,7a19.0",
"pci0014,7a19",
"pciclass060400",
"pciclass0604";
reg = <0x6800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@e,0 {
+ pcie@e,0 {
compatible = "pci0014,7a09.0",
"pci0014,7a09",
"pciclass060400",
"pciclass0604";
reg = <0x7000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
--
2.43.0