Re: [PATCH net-next v25 08/13] rtase: Implement net_device_ops

[Joe Damato]

On Mon, Jul 29, 2024 at 02:21:16PM +0800, Justin Lai wrote:
> 1. Implement .ndo_set_rx_mode so that the device can change address
> list filtering.
> 2. Implement .ndo_set_mac_address so that mac address can be changed.
> 3. Implement .ndo_change_mtu so that mtu can be changed.
> 4. Implement .ndo_tx_timeout to perform related processing when the
> transmitter does not make any progress.
> 5. Implement .ndo_get_stats64 to provide statistics that are called
> when the user wants to get network device usage.
> 6. Implement .ndo_vlan_rx_add_vid to register VLAN ID when the device
> supports VLAN filtering.
> 7. Implement .ndo_vlan_rx_kill_vid to unregister VLAN ID when the device
> supports VLAN filtering.
> 8. Implement the .ndo_setup_tc to enable setting any "tc" scheduler,
> classifier or action on dev.
> 9. Implement .ndo_fix_features enables adjusting requested feature flags
> based on device-specific constraints.
> 10. Implement .ndo_set_features enables updating device configuration to
> new features.
> 
> Signed-off-by: Justin Lai <justinlai0215@xxxxxxxxxxx>
> ---
>  .../net/ethernet/realtek/rtase/rtase_main.c   | 235 ++++++++++++++++++
>  1 file changed, 235 insertions(+)
> 
> diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> index 8fd69d96219f..80673fa1e9a3 100644

[...]

> +static void rtase_dump_state(const struct net_device *dev)
> +{

[...]

> +
> +	netdev_err(dev, "tx_packets %lld\n",
> +		   le64_to_cpu(counters->tx_packets));
> +	netdev_err(dev, "rx_packets %lld\n",
> +		   le64_to_cpu(counters->rx_packets));
> +	netdev_err(dev, "tx_errors %lld\n",
> +		   le64_to_cpu(counters->tx_errors));
> +	netdev_err(dev, "rx_errors %d\n",
> +		   le32_to_cpu(counters->rx_errors));
> +	netdev_err(dev, "rx_missed %d\n",
> +		   le16_to_cpu(counters->rx_missed));
> +	netdev_err(dev, "align_errors %d\n",
> +		   le16_to_cpu(counters->align_errors));
> +	netdev_err(dev, "tx_one_collision %d\n",
> +		   le32_to_cpu(counters->tx_one_collision));
> +	netdev_err(dev, "tx_multi_collision %d\n",
> +		   le32_to_cpu(counters->tx_multi_collision));
> +	netdev_err(dev, "rx_unicast %lld\n",
> +		   le64_to_cpu(counters->rx_unicast));
> +	netdev_err(dev, "rx_broadcast %lld\n",
> +		   le64_to_cpu(counters->rx_broadcast));
> +	netdev_err(dev, "rx_multicast %d\n",
> +		   le32_to_cpu(counters->rx_multicast));
> +	netdev_err(dev, "tx_aborted %d\n",
> +		   le16_to_cpu(counters->tx_aborted));
> +	netdev_err(dev, "tx_underun %d\n",
> +		   le16_to_cpu(counters->tx_underun));

You use le64/32/16_to_cpu here for all stats, but below in rtase_get_stats64, it
is only used for tx_errors.

The code should probably be consistent? Either you do or don't need
to use them?

> +}
> +
[...]
> +
> +static void rtase_get_stats64(struct net_device *dev,
> +			      struct rtnl_link_stats64 *stats)
> +{
> +	const struct rtase_private *tp = netdev_priv(dev);
> +	const struct rtase_counters *counters;
> +
> +	counters = tp->tally_vaddr;
> +
> +	dev_fetch_sw_netstats(stats, dev->tstats);
> +
> +	/* fetch additional counter values missing in stats collected by driver
> +	 * from tally counter
> +	 */
> +	rtase_dump_tally_counter(tp);
> +	stats->rx_errors = tp->stats.rx_errors;
> +	stats->tx_errors = le64_to_cpu(counters->tx_errors);
> +	stats->rx_dropped = tp->stats.rx_dropped;
> +	stats->tx_dropped = tp->stats.tx_dropped;
> +	stats->multicast = tp->stats.multicast;
> +	stats->rx_length_errors = tp->stats.rx_length_errors;

See above; le64_to_cpu for tx_errors, but not the rest of the stats. Why?