Re: [PATCH 1/2] dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings

[Hui-Ping Chen]

Dear Krzysztof,

Thank you for your reply.



On 2024/7/29 下午 03:29, Krzysztof Kozlowski wrote:
> On 29/07/2024 08:15, hpchen0 wrote:
> > Add dt-bindings for USB2 PHY found on the Nuvoton MA35 SoC.
> >
> > Signed-off-by: hpchen0 <hpchen0nvt@xxxxxxxxx>
> Please use proper name.

Okay, I will make the correction and use the correct name.



> > ---
> >   .../bindings/phy/nuvoton,ma35-usb2-phy.yaml   | 51 +++++++++++++++++++
> >   1 file changed, 51 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/phy/nuvoton,ma35-usb2-phy.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/phy/nuvoton,ma35-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/nuvoton,ma35-usb2-phy.yaml
> > new file mode 100644
> > index 000000000000..415ea2c45975
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/nuvoton,ma35-usb2-phy.yaml
> > @@ -0,0 +1,51 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/nuvoton,ma35-usb2-phy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Nuvoton MA35 USB2 phy
> > +
> > +maintainers:
> > +  - hpchen0 <hpchen0nvt@xxxxxxxxx>
> Same here

Okay, I will make the correction and use the correct name.



> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - nuvoton,ma35-usb2-phy
> All other devices have name ma35d1. Is this a different SoC?

The SoC is the same as ma35d1. I will modify ma35 to ma35d1.

Originally, I intended to create a series of shared drivers.



> > +
> > +  "#phy-cells":
> > +    const: 0
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description: USB PHY clock
> Drop description, it's obvious.

Okay, I will remove the description.



> > +
> > +  clock-names:
> > +    const: usbd_gate
> Drop clock-names, you do not bring any new information.

Okay, I will remove the clock-names.



> > +
> > +  nuvoton,sys:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      phandle of the system-management node.
> Describe what is it for.

Because this driver has some status bits located in the sys, it is 
necessary to reference the sys link.



> > +
> > +required:
> > +  - compatible
> > +  - clocks
> > +  - nuvoton,sys
> > +  - "#phy-cells"
> Keep the same order as in properties.

Okay, I will correct this issue.



> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> Where do you use it?

This is not used and will be removed. Thanks for the reminder.



> > +    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
> > +
> > +    usb_phy: usb-phy {
> > +        compatible = "nuvoton,ma35-usb2-phy";
> > +        clocks = <&clk USBD_GATE>;
> > +        clock-names = "usbd_gate";
> > +        nuvoton,sys = <&sys>;
> > +        #phy-cells = <0>;
> > +    };
> Best regards,
> Krzysztof


Best regards,

Hui-Ping Chen