RE: [PATCH v10 11/11] ras: scrub: ACPI RAS2: Add memory ACPI RAS2 driver

From: Shiju Jose
Date: Tue Jul 30 2024 - 04:33:35 EST

Next message: Kathara Sasikumar: "[PATCH] media: atomisp: Fix trailing statement in ia_css_de.host.c"
Previous message: Geert Uytterhoeven: "Re: [PATCH v11 4/9] spi: cadence: Add Marvell SDMA operations"
In reply to: Fan Ni: "Re: [PATCH v10 11/11] ras: scrub: ACPI RAS2: Add memory ACPI RAS2 driver"
Next in thread: shiju.jose: "[PATCH v10 10/11] ACPI:RAS2: Add ACPI RAS2 driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

>-----Original Message-----
>From: Fan Ni <nifan.cxl@xxxxxxxxx>
>Sent: 29 July 2024 23:19
>To: Shiju Jose <shiju.jose@xxxxxxxxxx>
>Cc: linux-edac@xxxxxxxxxxxxxxx; linux-cxl@xxxxxxxxxxxxxxx; linux-
>acpi@xxxxxxxxxxxxxxx; linux-mm@xxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>bp@xxxxxxxxx; tony.luck@xxxxxxxxx; rafael@xxxxxxxxxx; lenb@xxxxxxxxxx;
>mchehab@xxxxxxxxxx; dan.j.williams@xxxxxxxxx; dave@xxxxxxxxxxxx; Jonathan
>Cameron <jonathan.cameron@xxxxxxxxxx>; dave.jiang@xxxxxxxxx;
>alison.schofield@xxxxxxxxx; vishal.l.verma@xxxxxxxxx; ira.weiny@xxxxxxxxx;
>david@xxxxxxxxxx; Vilas.Sridharan@xxxxxxx; leo.duran@xxxxxxx;
>Yazen.Ghannam@xxxxxxx; rientjes@xxxxxxxxxx; jiaqiyan@xxxxxxxxxx;
>Jon.Grimm@xxxxxxx; dave.hansen@xxxxxxxxxxxxxxx;
>naoya.horiguchi@xxxxxxx; james.morse@xxxxxxx; jthoughton@xxxxxxxxxx;
>somasundaram.a@xxxxxxx; erdemaktas@xxxxxxxxxx; pgonda@xxxxxxxxxx;
>duenwen@xxxxxxxxxx; mike.malvestuto@xxxxxxxxx; gthelen@xxxxxxxxxx;
>wschwartz@xxxxxxxxxxxxxxxxxxx; dferguson@xxxxxxxxxxxxxxxxxxx;
>wbs@xxxxxxxxxxxxxxxxxxxxxx; nifan.cxl@xxxxxxxxx; tanxiaofei
><tanxiaofei@xxxxxxxxxx>; Zengtao (B) <prime.zeng@xxxxxxxxxxxxx>; Roberto
>Sassu <roberto.sassu@xxxxxxxxxx>; kangkang.shen@xxxxxxxxxxxxx;
>wanghuiqiang <wanghuiqiang@xxxxxxxxxx>; Linuxarm
><linuxarm@xxxxxxxxxx>
>Subject: Re: [PATCH v10 11/11] ras: scrub: ACPI RAS2: Add memory ACPI RAS2
>driver
>
>On Fri, Jul 26, 2024 at 05:05:55PM +0100, shiju.jose@xxxxxxxxxx wrote:
>> From: Shiju Jose <shiju.jose@xxxxxxxxxx>
>>
>> Memory ACPI RAS2 driver binds to the platform device add by the
>s/add/added/
>> ACPI RAS2 table parser.
>>
>> Driver uses a PCC subspace for communicating with the ACPI compliant
>> platform to provide control of memory scrub parameters to the
>> userspace via the edac scrub.
>>
>> Get the scrub attr descriptors from the EDAC scrub and register with
>> EDAC RAS feature driver to expose sysfs scrub control attributes to the
>userspace.
>> For example scrub control for the RAS2 memory device is exposed in
>> /sys/bus/edac/devices/acpi_ras2_mem0/scrub/
>>
>> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>> Signed-off-by: Shiju Jose <shiju.jose@xxxxxxxxxx>
>> ---
>> Documentation/scrub/edac-scrub.rst | 41 +++
>> drivers/ras/Kconfig | 10 +
>> drivers/ras/Makefile | 1 +
>> drivers/ras/acpi_ras2.c | 415 +++++++++++++++++++++++++++++
>> 4 files changed, 467 insertions(+)
>> create mode 100644 drivers/ras/acpi_ras2.c
>>
>> diff --git a/Documentation/scrub/edac-scrub.rst
>> b/Documentation/scrub/edac-scrub.rst
>> index 7815d674f496..348f98091ac1 100644
>> --- a/Documentation/scrub/edac-scrub.rst
>> +++ b/Documentation/scrub/edac-scrub.rst
>> @@ -72,3 +72,44 @@ root@localhost:~# cat
>> /sys/bus/edac/devices/cxl_region0/scrub/enable_background
>> root@localhost:~# echo 0 >
>> /sys/bus/edac/devices/cxl_region0/scrub/enable_background
>> root@localhost:~# cat
>> /sys/bus/edac/devices/cxl_region0/scrub/enable_background
>> 0
>> +
>> +2. RAS2
>> +2.1 On demand scrubbing for a specific memory region.
>> +root@localhost:~# echo 0x120000 >
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/addr_range_base
>> +root@localhost:~# echo 0x150000 >
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/addr_range_size
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/min_cycle_duration
>> +1
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/max_cycle_duration
>> +24
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
>> +10
>> +root@localhost:~# echo 15 >
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
>> +root@localhost:~# echo 1 >
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/enable_on_demand
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/enable_on_demand
>> +1
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
>> +15
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/addr_range_base
>> +0x120000
>> +root@localhost:~# cat
>> +//sys/bus/edac/devices/acpi_ras2_mem0/scrub/addr_range_size
>> +0x150000
>> +root@localhost:~# echo 0 >
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/enable_on_demand
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/enable_on_demand
>> +0
>> +
>> +2.2 Background scrubbing the entire memory root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/min_cycle_duration
>> +1
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/max_cycle_duration
>> +24
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
>> +10
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/enable_background
>> +0
>> +root@localhost:~# echo 3 >
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
>> +root@localhost:~# echo 1 >
>> +/sys/bus/edac/devices/acpi_ras2_mem0/enable_background
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/enable_background
>> +1
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
>> +3
>> +root@localhost:~# echo 0 >
>> +/sys/bus/edac/devices/acpi_ras2_mem0/enable_background
>> diff --git a/drivers/ras/Kconfig b/drivers/ras/Kconfig index
>> fc4f4bb94a4c..a2635017d80d 100644
>> --- a/drivers/ras/Kconfig
>> +++ b/drivers/ras/Kconfig
>> @@ -46,4 +46,14 @@ config RAS_FMPM
>> Memory will be retired during boot time and run time depending on
>> platform-specific policies.
>>
>> +config MEM_ACPI_RAS2
>> + tristate "Memory ACPI RAS2 driver"
>> + depends on ACPI_RAS2
>> + depends on EDAC
>> + help
>> + The driver binds to the platform device added by the ACPI RAS2
>> + table parser. Use a PCC channel subspace for communicating with
>> + the ACPI compliant platform to provide control of memory scrub
>> + parameters to the user via the edac scrub.
>> +
>> endif
>> diff --git a/drivers/ras/Makefile b/drivers/ras/Makefile index
>> 11f95d59d397..a0e6e903d6b0 100644
>> --- a/drivers/ras/Makefile
>> +++ b/drivers/ras/Makefile
>> @@ -2,6 +2,7 @@
>> obj-$(CONFIG_RAS) += ras.o
>> obj-$(CONFIG_DEBUG_FS) += debugfs.o
>> obj-$(CONFIG_RAS_CEC) += cec.o
>> +obj-$(CONFIG_MEM_ACPI_RAS2) += acpi_ras2.o
>>
>> obj-$(CONFIG_RAS_FMPM) += amd/fmpm.o
>> obj-y += amd/atl/
>> diff --git a/drivers/ras/acpi_ras2.c b/drivers/ras/acpi_ras2.c new
>> file mode 100644 index 000000000000..b2381d5b37d0
>> --- /dev/null
>> +++ b/drivers/ras/acpi_ras2.c
>> @@ -0,0 +1,415 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * ACPI RAS2 memory driver
>> + *
>> + * Copyright (c) 2024 HiSilicon Limited.
>> + *
>> + */
>> +
>> +#define pr_fmt(fmt) "MEMORY ACPI RAS2: " fmt
>> +
>> +#include <linux/edac_ras_feature.h>
>> +#include <linux/platform_device.h>
>> +#include <acpi/ras2_acpi.h>
>> +
>> +#define RAS2_DEV_NUM_RAS_FEATURES 1
>> +
>> +#define RAS2_SUPPORT_HW_PARTOL_SCRUB BIT(0)
>> +#define RAS2_TYPE_PATROL_SCRUB 0x0000
>> +
>> +#define RAS2_GET_PATROL_PARAMETERS 0x01
>> +#define RAS2_START_PATROL_SCRUBBER 0x02
>> +#define RAS2_STOP_PATROL_SCRUBBER 0x03
>> +
>> +#define RAS2_PATROL_SCRUB_SCHRS_IN_MASK GENMASK(15, 8)
>> +#define RAS2_PATROL_SCRUB_EN_BACKGROUND BIT(0)
>> +#define RAS2_PATROL_SCRUB_SCHRS_OUT_MASK GENMASK(7, 0)
>> +#define RAS2_PATROL_SCRUB_MIN_SCHRS_OUT_MASK GENMASK(15,
>8)
>> +#define RAS2_PATROL_SCRUB_MAX_SCHRS_OUT_MASK GENMASK(23,
>16)
>> +#define RAS2_PATROL_SCRUB_FLAG_SCRUBBER_RUNNING BIT(0)
>> +
>> +#define RAS2_SCRUB_NAME_LEN 128
>> +
>> +struct acpi_ras2_ps_shared_mem {
>> + struct acpi_ras2_shared_memory common;
>> + struct acpi_ras2_patrol_scrub_parameter params; };
>> +
>> +static int ras2_is_patrol_scrub_support(struct ras2_scrub_ctx
>> +*ras2_ctx) {
>> + struct acpi_ras2_shared_memory __iomem *common = (void *)
>> + ras2_ctx->pcc_subspace->pcc_comm_addr;
>> +
>> + guard(mutex)(&ras2_ctx->lock);
>> + common->set_capabilities[0] = 0;
>> +
>> + return common->features[0] & RAS2_SUPPORT_HW_PARTOL_SCRUB; }
>> +
>> +static int ras2_update_patrol_scrub_params_cache(struct
>> +ras2_scrub_ctx *ras2_ctx) {
>> + struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
>> + ras2_ctx->pcc_subspace-
>>pcc_comm_addr;
>> + int ret;
>> +
>> + ps_sm->common.set_capabilities[0] =
>RAS2_SUPPORT_HW_PARTOL_SCRUB;
>> + ps_sm->params.patrol_scrub_command =
>RAS2_GET_PATROL_PARAMETERS;
>> +
>> + ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
>> + if (ret) {
>> + dev_err(ras2_ctx->dev, "failed to read parameters\n");
>> + return ret;
>> + }
>> +
>> + ras2_ctx->min_scrub_cycle =
>FIELD_GET(RAS2_PATROL_SCRUB_MIN_SCHRS_OUT_MASK,
>> + ps_sm->params.scrub_params_out);
>> + ras2_ctx->max_scrub_cycle =
>FIELD_GET(RAS2_PATROL_SCRUB_MAX_SCHRS_OUT_MASK,
>> + ps_sm->params.scrub_params_out);
>> + if (!ras2_ctx->bg) {
>> + ras2_ctx->base = ps_sm->params.actual_address_range[0];
>> + ras2_ctx->size = ps_sm->params.actual_address_range[1];
>> + }
>> + ras2_ctx->scrub_cycle_secs =
>FIELD_GET(RAS2_PATROL_SCRUB_SCHRS_OUT_MASK,
>> + ps_sm-
>>params.scrub_params_out);
>> +
>> + return 0;
>> +}
>> +
>> +/* Context - lock must be held */
>> +static int ras2_get_patrol_scrub_running(struct ras2_scrub_ctx *ras2_ctx,
>> + bool *running)
>> +{
>> + struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
>> + ras2_ctx->pcc_subspace-
>>pcc_comm_addr;
>> + int ret;
>> +
>> + ps_sm->common.set_capabilities[0] =
>RAS2_SUPPORT_HW_PARTOL_SCRUB;
>> + ps_sm->params.patrol_scrub_command =
>RAS2_GET_PATROL_PARAMETERS;
>> +
>> + ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
>> + if (ret) {
>> + dev_err(ras2_ctx->dev, "failed to read parameters\n");
>> + return ret;
>> + }
>> +
>> + *running = ps_sm->params.flags &
>> +RAS2_PATROL_SCRUB_FLAG_SCRUBBER_RUNNING;
>> +
>> + return 0;
>> +}
>> +
>> +static int ras2_hw_scrub_read_min_scrub_cycle(struct device *dev, void
>*drv_data,
>> + u32 *min)
>> +{
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> +
>> + *min = ras2_ctx->min_scrub_cycle;
>> +
>> + return 0;
>> +}
>> +
>> +static int ras2_hw_scrub_read_max_scrub_cycle(struct device *dev, void
>*drv_data,
>> + u32 *max)
>> +{
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> +
>> + *max = ras2_ctx->max_scrub_cycle;
>> +
>> + return 0;
>> +}
>> +
>> +static int ras2_hw_scrub_cycle_read(struct device *dev, void *drv_data,
>> + u32 *scrub_cycle_secs)
>> +{
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> +
>> + *scrub_cycle_secs = ras2_ctx->scrub_cycle_secs;
>> +
>> + return 0;
>> +}
>> +
>> +static int ras2_hw_scrub_cycle_write(struct device *dev, void *drv_data,
>> + u32 scrub_cycle_secs)
>> +{
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> + bool running;
>> + int ret;
>> +
>> + guard(mutex)(&ras2_ctx->lock);
>> + ret = ras2_get_patrol_scrub_running(ras2_ctx, &running);
>> + if (ret)
>> + return ret;
>> +
>> + if (running)
>> + return -EBUSY;
>> +
>> + if (scrub_cycle_secs < ras2_ctx->min_scrub_cycle ||
>> + scrub_cycle_secs > ras2_ctx->max_scrub_cycle)
>> + return -EINVAL;
>> +
>> + ras2_ctx->scrub_cycle_secs = scrub_cycle_secs;
>> +
>> + return 0;
>> +}
>> +
>> +static int ras2_hw_scrub_read_range(struct device *dev, void
>> +*drv_data, u64 *base, u64 *size) {
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> +
>> + /*
>> + * When BG scrubbing is enabled the actual address range is not valid.
>> + * Return -EBUSY now unless findout a method to retrieve actual full PA
>range.
>> + */
>> + if (ras2_ctx->bg)
>> + return -EBUSY;
>> +
>> + *base = ras2_ctx->base;
>> + *size = ras2_ctx->size;
>> +
>> + return 0;
>> +}
>> +
>> +static int ras2_hw_scrub_write_range(struct device *dev, void
>> +*drv_data, u64 base, u64 size) {
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> + bool running;
>> + int ret;
>> +
>> + guard(mutex)(&ras2_ctx->lock);
>> + ret = ras2_get_patrol_scrub_running(ras2_ctx, &running);
>> + if (ret)
>> + return ret;
>> +
>> + if (running)
>> + return -EBUSY;
>> +
>> + if (!base || !size) {
>> + dev_warn(dev, "%s: Invalid address range, base=0x%llx
>size=0x%llx\n",
>> + __func__, base, size);
>> + return -EINVAL;
>> + }
>> +
>> + ras2_ctx->base = base;
>> + ras2_ctx->size = size;
>> +
>> + return 0;
>> +}
>> +
>> +static int ras2_hw_scrub_set_enabled_bg(struct device *dev, void
>> +*drv_data, bool enable) {
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> + struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
>> + ras2_ctx->pcc_subspace-
>>pcc_comm_addr;
>> + bool enabled;
>> + int ret;
>> +
>> + guard(mutex)(&ras2_ctx->lock);
>> + ps_sm->common.set_capabilities[0] =
>RAS2_SUPPORT_HW_PARTOL_SCRUB;
>> + ret = ras2_get_patrol_scrub_running(ras2_ctx, &enabled);
>We have a passed-in argument "enable", we have another local variable
>"enabled", will "running" be more accurate instead of "enabled"? The same as in
>ras2_hw_scrub_set_enabled_od()
Sure.

>
>Fan
>> + if (ret)
>> + return ret;
>> + if (enable) {
>> + if (ras2_ctx->bg || enabled)
>> + return -EBUSY;
>> + ps_sm->params.requested_address_range[0] = 0;
>> + ps_sm->params.requested_address_range[1] = 0;
>> + ps_sm->params.scrub_params_in &=
>~RAS2_PATROL_SCRUB_SCHRS_IN_MASK;
>> + ps_sm->params.scrub_params_in |=
>FIELD_PREP(RAS2_PATROL_SCRUB_SCHRS_IN_MASK,
>> + ras2_ctx-
>>scrub_cycle_secs);
>> + ps_sm->params.patrol_scrub_command =
>RAS2_START_PATROL_SCRUBBER;
>> + } else {
>> + if (!ras2_ctx->bg)
>> + return -EPERM;
>> + if (!ras2_ctx->bg && enabled)
>> + return -EBUSY;
>> + ps_sm->params.patrol_scrub_command =
>RAS2_STOP_PATROL_SCRUBBER;
>> + }
>> + ps_sm->params.scrub_params_in &=
>~RAS2_PATROL_SCRUB_EN_BACKGROUND;
>> + ps_sm->params.scrub_params_in |=
>FIELD_PREP(RAS2_PATROL_SCRUB_EN_BACKGROUND,
>> + enable);
>> + ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
>> + if (ret) {
>> + dev_err(ras2_ctx->dev, "%s: failed to enable(%d) background
>scrubbing\n",
>> + __func__, enable);
>
>Similar suggestion as below.
Will do.
>
>> + return ret;
>> + }
>> + if (enable) {
>> + ras2_ctx->bg = true;
>> + /* Update the cache to account for rounding of supplied
>parameters and similar */
>> + ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
>> + } else {
>> + ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
>> + ras2_ctx->bg = false;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int ras2_hw_scrub_get_enabled_bg(struct device *dev, void
>> +*drv_data, bool *enabled) {
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> +
>> + *enabled = ras2_ctx->bg;
>> +
>> + return 0;
>> +}
>> +
>> +static int ras2_hw_scrub_set_enabled_od(struct device *dev, void
>> +*drv_data, bool enable) {
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> + struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
>> + ras2_ctx->pcc_subspace-
>>pcc_comm_addr;
>> + bool enabled;
>> + int ret;
>> +
>> + guard(mutex)(&ras2_ctx->lock);
>> + ps_sm->common.set_capabilities[0] =
>RAS2_SUPPORT_HW_PARTOL_SCRUB;
>> + if (ras2_ctx->bg)
>> + return -EBUSY;
>> + ret = ras2_get_patrol_scrub_running(ras2_ctx, &enabled);
>> + if (ret)
>> + return ret;
>> + if (enable) {
>> + if (!ras2_ctx->base || !ras2_ctx->size) {
>> + dev_warn(ras2_ctx->dev,
>> + "%s: Invalid address range, base=0x%llx "
>> + "size=0x%llx\n", __func__,
>> + ras2_ctx->base, ras2_ctx->size);
>> + return -ERANGE;
>> + }
>> + if (enabled)
>> + return -EBUSY;
>> + ps_sm->params.scrub_params_in &=
>~RAS2_PATROL_SCRUB_SCHRS_IN_MASK;
>> + ps_sm->params.scrub_params_in |=
>FIELD_PREP(RAS2_PATROL_SCRUB_SCHRS_IN_MASK,
>> + ras2_ctx-
>>scrub_cycle_secs);
>> + ps_sm->params.requested_address_range[0] = ras2_ctx->base;
>> + ps_sm->params.requested_address_range[1] = ras2_ctx->size;
>> + ps_sm->params.scrub_params_in &=
>~RAS2_PATROL_SCRUB_EN_BACKGROUND;
>> + ps_sm->params.patrol_scrub_command =
>RAS2_START_PATROL_SCRUBBER;
>> + } else {
>> + if (!enabled)
>> + return 0;
>> + ps_sm->params.patrol_scrub_command =
>RAS2_STOP_PATROL_SCRUBBER;
>> + }
>> +
>> + ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
>> + if (ret) {
>> + dev_err(ras2_ctx->dev, "failed to enable(%d) the demand
>> +scrubbing\n", enable);
>Can we improve the messaging as below to make it clearer?
> dev_err(ras2_ctx->dev, "failed to %s the demand scrubbing\n", enable ?
>"enable":"disable");
Will do.

>
>Fan
>> + return ret;
>> + }
>> +
>> + return ras2_update_patrol_scrub_params_cache(ras2_ctx);
>> +}
>> +
>> +static int ras2_hw_scrub_get_enabled_od(struct device *dev, void
>> +*drv_data, bool *enabled) {
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> +
>> + guard(mutex)(&ras2_ctx->lock);
>> + if (ras2_ctx->bg) {
>> + *enabled = false;
>> + return 0;
>> + }
>> +
>> + return ras2_get_patrol_scrub_running(ras2_ctx, enabled); }
>> +
>> +static int ras2_hw_scrub_get_name(struct device *dev, void *drv_data,
>> +char *name) {
>> + struct ras2_scrub_ctx *ras2_ctx = drv_data;
>> +
>> + return sysfs_emit(name, "acpi_ras2_mem%d_scrub\n", ras2_ctx->id); }
>> +
>> +static const struct edac_scrub_ops ras2_scrub_ops = {
>> + .read_range = ras2_hw_scrub_read_range,
>> + .write_range = ras2_hw_scrub_write_range,
>> + .get_enabled_bg = ras2_hw_scrub_get_enabled_bg,
>> + .set_enabled_bg = ras2_hw_scrub_set_enabled_bg,
>> + .get_enabled_od = ras2_hw_scrub_get_enabled_od,
>> + .set_enabled_od = ras2_hw_scrub_set_enabled_od,
>> + .get_name = ras2_hw_scrub_get_name,
>> + .min_cycle_read = ras2_hw_scrub_read_min_scrub_cycle,
>> + .max_cycle_read = ras2_hw_scrub_read_max_scrub_cycle,
>> + .cycle_duration_read = ras2_hw_scrub_cycle_read,
>> + .cycle_duration_write = ras2_hw_scrub_cycle_write, };
>> +
>> +static DEFINE_IDA(ras2_ida);
>> +
>> +static void ida_release(void *ctx)
>> +{
>> + struct ras2_scrub_ctx *ras2_ctx = ctx;
>> +
>> + ida_free(&ras2_ida, ras2_ctx->id);
>> +}
>> +
>> +static int ras2_probe(struct platform_device *pdev) {
>> + struct edac_ras_feature ras_features[RAS2_DEV_NUM_RAS_FEATURES];
>> + char scrub_name[RAS2_SCRUB_NAME_LEN];
>> + struct ras2_scrub_ctx *ras2_ctx;
>> + int num_ras_features = 0;
>> + int ret, id;
>> +
>> + /* RAS2 PCC Channel and Scrub specific context */
>> + ras2_ctx = devm_kzalloc(&pdev->dev, sizeof(*ras2_ctx), GFP_KERNEL);
>> + if (!ras2_ctx)
>> + return -ENOMEM;
>> +
>> + ras2_ctx->dev = &pdev->dev;
>> + mutex_init(&ras2_ctx->lock);
>> +
>> + ret = devm_ras2_register_pcc_channel(&pdev->dev, ras2_ctx,
>> + *((int *)dev_get_platdata(&pdev-
>>dev)));
>> + if (ret < 0) {
>> + dev_dbg(ras2_ctx->dev,
>> + "failed to register pcc channel ret=%d\n", ret);
>> + return ret;
>> + }
>> + if (!ras2_is_patrol_scrub_support(ras2_ctx))
>> + return -EOPNOTSUPP;
>> +
>> + ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
>> + if (ret)
>> + return ret;
>> +
>> + id = ida_alloc(&ras2_ida, GFP_KERNEL);
>> + if (id < 0)
>> + return id;
>> +
>> + ras2_ctx->id = id;
>> +
>> + ret = devm_add_action_or_reset(&pdev->dev, ida_release, ras2_ctx);
>> + if (ret < 0)
>> + return ret;
>> +
>> + snprintf(scrub_name, sizeof(scrub_name), "acpi_ras2_mem%d",
>> + ras2_ctx->id);
>> +
>> + ras_features[num_ras_features].feat = RAS_FEAT_SCRUB;
>> + ras_features[num_ras_features].scrub_ops = &ras2_scrub_ops;
>> + ras_features[num_ras_features].scrub_ctx = ras2_ctx;
>> + num_ras_features++;
>> +
>> + return edac_ras_dev_register(&pdev->dev, scrub_name, NULL,
>> + num_ras_features, ras_features); }
>> +
>> +static const struct platform_device_id ras2_id_table[] = {
>> + { .name = "acpi_ras2", },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(platform, ras2_id_table);
>> +
>> +static struct platform_driver ras2_driver = {
>> + .probe = ras2_probe,
>> + .driver = {
>> + .name = "acpi_ras2",
>> + },
>> + .id_table = ras2_id_table,
>> +};
>> +module_driver(ras2_driver, platform_driver_register,
>> +platform_driver_unregister);
>> +
>> +MODULE_IMPORT_NS(ACPI_RAS2);
>> +MODULE_DESCRIPTION("ACPI RAS2 memory driver");
>MODULE_LICENSE("GPL");
>> --
>> 2.34.1
>>

Thanks,
Shiju

Next message: Kathara Sasikumar: "[PATCH] media: atomisp: Fix trailing statement in ia_css_de.host.c"
Previous message: Geert Uytterhoeven: "Re: [PATCH v11 4/9] spi: cadence: Add Marvell SDMA operations"
In reply to: Fan Ni: "Re: [PATCH v10 11/11] ras: scrub: ACPI RAS2: Add memory ACPI RAS2 driver"
Next in thread: shiju.jose: "[PATCH v10 10/11] ACPI:RAS2: Add ACPI RAS2 driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]