[PATCH V3 0/8] Add camera clock controller support for SM8150

From: Satya Priya Kakitapalli
Date: Wed Jul 31 2024 - 02:30:52 EST


Add camcc support and Regera PLL ops. Also, fix the pll post div mask.

Changes in V3:
- Split the fixes into separate patches, remove RETAIN_FF flag for
gdscs and document the BIT(15) of pll alpha value.
- Link to v2: https://lore.kernel.org/all/20240702-camcc-support-sm8150-v2-1-4baf54ec7333@xxxxxxxxxxx

Changes in v2:
- As per Konrad's comments, re-use the zonda pll code for regera, as
both are mostly same.
- Fix the zonda_set_rate API and also the pll_post_div shift used in
trion pll post div set rate API
- Link to v1: https://lore.kernel.org/r/20240229-camcc-support-sm8150-v1-0-8c28c6c87990@xxxxxxxxxxx


Satya Priya Kakitapalli (7):
clk: qcom: clk-alpha-pll: Fix the pll post div mask
clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is
disabled
clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
dt-bindings: clock: qcom: Add SM8150 camera clock controller
clk: qcom: Add camera clock controller driver for SM8150
arm64: dts: qcom: Add camera clock controller for sm8150

Taniya Das (1):
clk: qcom: clk-alpha-pll: Add support for Regera PLL ops

.../bindings/clock/qcom,sm8150-camcc.yaml | 77 +
arch/arm64/boot/dts/qcom/sa8155p.dtsi | 4 +
arch/arm64/boot/dts/qcom/sm8150.dtsi | 13 +
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/camcc-sm8150.c | 2159 +++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.c | 57 +-
drivers/clk/qcom/clk-alpha-pll.h | 5 +
include/dt-bindings/clock/qcom,sm8150-camcc.h | 135 ++
9 files changed, 2456 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml
create mode 100644 drivers/clk/qcom/camcc-sm8150.c
create mode 100644 include/dt-bindings/clock/qcom,sm8150-camcc.h

--
2.25.1