Re: [PATCH net-next v5 13/14] microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY
From: Parthiban.Veerasooran
Date: Wed Jul 31 2024 - 04:04:21 EST
Hi Stefan,
On 30/07/24 11:46 am, Stefan Bigler wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Hi Parthiban
>
> Thanks for v5. I tested and after some fixes it works (I'm still on 6.6.y but it was easy to apply the patches).
>
> I found the following issues:
>
> 1) set of Mac-Addr is not working correctly
> be ware to the fact that eth_commit_mac_addr_change() takes the pointer to the sockaddr and not to the sa_data
>
> drivers/net/ethernet/microchip/lan865x/lan865x.c
> @@ -278,7 +278,7 @@ static int lan865x_set_mac_address(struct net_device *netdev, void *addr)
> if (ret)
> return ret;
> - eth_commit_mac_addr_change(netdev, address->sa_data);
> + eth_commit_mac_addr_change(netdev, address);
Ah ok, sorry for the wrong one. Sure will correct it in the next version.
>
> 2) Missing symbol export
> drivers/net/ethernet/oa_tc6.c
> @@ -1224,6 +1224,8 @@ int oa_tc6_zero_align_receive_frame_enable(struct oa_tc6 *tc6)
> return oa_tc6_write_register(tc6, OA_TC6_REG_CONFIG0, regval);
> }
> +EXPORT_SYMBOL_GPL(oa_tc6_zero_align_receive_frame_enable);
Yes, I already changed it in the reposted v5 due to net-next window was
closed previously.
>
> 3) My patch for Multicast support was incomplete
> Sorry for this. I did forgott to write that the MAC_NET_CFG_MULTICAST_MODE must be set.
> I addition I also added the correct implemenation for IFF_ALLMULTI
>
> drivers/net/ethernet/microchip/lan865x/lan865x.c
> @@ -330,6 +330,22 @@ static void lan865x_set_specific_multicast_addr(struct net_device *netdev)
> netdev_err(netdev, "Failed to write reg_hashl");
> }
>
> +static void lan865x_set_all_multicast_addr(struct net_device *netdev)
> +{
> + struct lan865x_priv *priv = netdev_priv(netdev);
> + u32 hash_lo = 0xffffffff;
> + u32 hash_hi = 0xffffffff;
> +
> + /* Enabling specific multicast addresses */
> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_HASH, hash_hi)) {
> + netdev_err(netdev, "Failed to write reg_hashh");
> + return;
> + }
> +
> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_L_HASH, hash_lo))
> + netdev_err(netdev, "Failed to write reg_hashl");
> +}
> +
> static void lan865x_multicast_work_handler(struct work_struct *work)
> {
> struct lan865x_priv *priv = container_of(work, struct lan865x_priv,
> @@ -343,14 +359,15 @@ static void lan865x_multicast_work_handler(struct work_struct *work)
> regval &= (~MAC_NET_CFG_UNICAST_MODE);
> } else if (priv->netdev->flags & IFF_ALLMULTI) {
> /* Enabling all multicast mode */
> + lan865x_set_all_multicast_addr(priv->netdev);
> regval &= (~MAC_NET_CFG_PROMISCUOUS_MODE);
> regval |= MAC_NET_CFG_MULTICAST_MODE;
> regval &= (~MAC_NET_CFG_UNICAST_MODE);
> } else if (!netdev_mc_empty(priv->netdev)) {
> lan865x_set_specific_multicast_addr(priv->netdev);
> regval &= (~MAC_NET_CFG_PROMISCUOUS_MODE);
> - regval &= (~MAC_NET_CFG_MULTICAST_MODE);
> - regval |= MAC_NET_CFG_UNICAST_MODE;
> + regval |= MAC_NET_CFG_MULTICAST_MODE;
> + regval &= (~MAC_NET_CFG_UNICAST_MODE);
> } else {
Sure, I will consider this in the next version. Thanks a lot for your
support on this.
Best regards,
Parthiban V
>
> Thanks for your work.
> Best Regards
> Stefan
>
>
> Am 2024-07-30T06:09:05.000+02:00 hat Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx> geschrieben:
>
>> The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x
>> MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4
>> MAC integration provides the low pin count standard SPI interface to any
>> microcontroller therefore providing Ethernet functionality without
>> requiring MAC integration within the microcontroller. The LAN8650/1
>> operates as an SPI client supporting SCLK clock rates up to a maximum of
>> 25 MHz. This SPI interface supports the transfer of both data (Ethernet
>> frames) and control (register access).
>>
>> By default, the chunk data payload is 64 bytes in size. The Ethernet
>> Media Access Controller (MAC) module implements a 10 Mbps half duplex
>> Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S
>> physical layer transceiver integrated is into the LAN8650/1. The PHY and
>> MAC are connected via an internal Media Independent Interface (MII).
>>
>> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx>
>> ---
>> MAINTAINERS | 6 +
>> drivers/net/ethernet/microchip/Kconfig | 1 +
>> drivers/net/ethernet/microchip/Makefile | 1 +
>> .../net/ethernet/microchip/lan865x/Kconfig | 19 +
>> .../net/ethernet/microchip/lan865x/Makefile | 6 +
>> .../net/ethernet/microchip/lan865x/lan865x.c | 391 ++++++++++++++++++
>> 6 files changed, 424 insertions(+)
>> create mode 100644 drivers/net/ethernet/microchip/lan865x/Kconfig
>> create mode 100644 drivers/net/ethernet/microchip/lan865x/Makefile
>> create mode 100644 drivers/net/ethernet/microchip/lan865x/lan865x.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index ee490b9e363c..907522277010 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -14949,6 +14949,12 @@ L: netdev@xxxxxxxxxxxxxxx
>> S: Maintained
>> F: drivers/net/ethernet/microchip/lan743x_*
>>
>> +MICROCHIP LAN8650/1 10BASE-T1S MACPHY ETHERNET DRIVER
>> +M: Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
>> +L: netdev@xxxxxxxxxxxxxxx
>> +S: Maintained
>> +F: drivers/net/ethernet/microchip/lan865x/lan865x.c
>> +
>> MICROCHIP LAN87xx/LAN937x T1 PHY DRIVER
>> M: Arun Ramadoss <arun.ramadoss@xxxxxxxxxxxxx>
>> R: UNGLinuxDriver@xxxxxxxxxxxxx
>> diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
>> index 43ba71e82260..06ca79669053 100644
>> --- a/drivers/net/ethernet/microchip/Kconfig
>> +++ b/drivers/net/ethernet/microchip/Kconfig
>> @@ -56,6 +56,7 @@ config LAN743X
>> To compile this driver as a module, choose M here. The module will be
>> called lan743x.
>>
>> +source "drivers/net/ethernet/microchip/lan865x/Kconfig"
>> source "drivers/net/ethernet/microchip/lan966x/Kconfig"
>> source "drivers/net/ethernet/microchip/sparx5/Kconfig"
>> source "drivers/net/ethernet/microchip/vcap/Kconfig"
>> diff --git a/drivers/net/ethernet/microchip/Makefile b/drivers/net/ethernet/microchip/Makefile
>> index bbd349264e6f..15dfbb321057 100644
>> --- a/drivers/net/ethernet/microchip/Makefile
>> +++ b/drivers/net/ethernet/microchip/Makefile
>> @@ -9,6 +9,7 @@ obj-$(CONFIG_LAN743X) += lan743x.o
>>
>> lan743x-objs := lan743x_main.o lan743x_ethtool.o lan743x_ptp.o
>>
>> +obj-$(CONFIG_LAN865X) += lan865x/
>> obj-$(CONFIG_LAN966X_SWITCH) += lan966x/
>> obj-$(CONFIG_SPARX5_SWITCH) += sparx5/
>> obj-$(CONFIG_VCAP) += vcap/
>> diff --git a/drivers/net/ethernet/microchip/lan865x/Kconfig b/drivers/net/ethernet/microchip/lan865x/Kconfig
>> new file mode 100644
>> index 000000000000..f3d60d14e202
>> --- /dev/null
>> +++ b/drivers/net/ethernet/microchip/lan865x/Kconfig
>> @@ -0,0 +1,19 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +#
>> +# Microchip LAN865x Driver Support
>> +#
>> +
>> +if NET_VENDOR_MICROCHIP
>> +
>> +config LAN865X
>> + tristate "LAN865x support"
>> + depends on SPI
>> + depends on OA_TC6
>> + help
>> + Support for the Microchip LAN8650/1 Rev.B1 MACPHY Ethernet chip. It
>> + uses OPEN Alliance 10BASE-T1x Serial Interface specification.
>> +
>> + To compile this driver as a module, choose M here. The module will be
>> + called lan865x.
>> +
>> +endif # NET_VENDOR_MICROCHIP
>> diff --git a/drivers/net/ethernet/microchip/lan865x/Makefile b/drivers/net/ethernet/microchip/lan865x/Makefile
>> new file mode 100644
>> index 000000000000..9f5dd89c1eb8
>> --- /dev/null
>> +++ b/drivers/net/ethernet/microchip/lan865x/Makefile
>> @@ -0,0 +1,6 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +#
>> +# Makefile for the Microchip LAN865x Driver
>> +#
>> +
>> +obj-$(CONFIG_LAN865X) += lan865x.o
>> diff --git a/drivers/net/ethernet/microchip/lan865x/lan865x.c b/drivers/net/ethernet/microchip/lan865x/lan865x.c
>> new file mode 100644
>> index 000000000000..b25c927659f4
>> --- /dev/null
>> +++ b/drivers/net/ethernet/microchip/lan865x/lan865x.c
>> @@ -0,0 +1,391 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Microchip's LAN865x 10BASE-T1S MAC-PHY driver
>> + *
>> + * Author: Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/phy.h>
>> +#include <linux/oa_tc6.h>
>> +
>> +#define DRV_NAME "lan8650"
>> +
>> +/* MAC Network Control Register */
>> +#define LAN865X_REG_MAC_NET_CTL 0x00010000
>> +#define MAC_NET_CTL_TXEN BIT(3) /* Transmit Enable */
>> +#define MAC_NET_CTL_RXEN BIT(2) /* Receive Enable */
>> +
>> +/* MAC Network Configuration Reg */
>> +#define LAN865X_REG_MAC_NET_CFG 0x00010001
>> +#define MAC_NET_CFG_PROMISCUOUS_MODE BIT(4)
>> +#define MAC_NET_CFG_MULTICAST_MODE BIT(6)
>> +#define MAC_NET_CFG_UNICAST_MODE BIT(7)
>> +
>> +/* MAC Hash Register Bottom */
>> +#define LAN865X_REG_MAC_L_HASH 0x00010020
>> +/* MAC Hash Register Top */
>> +#define LAN865X_REG_MAC_H_HASH 0x00010021
>> +/* MAC Specific Addr 1 Bottom Reg */
>> +#define LAN865X_REG_MAC_L_SADDR1 0x00010022
>> +/* MAC Specific Addr 1 Top Reg */
>> +#define LAN865X_REG_MAC_H_SADDR1 0x00010023
>> +
>> +struct lan865x_priv {
>> + struct work_struct multicast_work;
>> + struct net_device *netdev;
>> + struct spi_device *spi;
>> + struct oa_tc6 *tc6;
>> +};
>> +
>> +static int lan865x_set_hw_macaddr_low_bytes(struct oa_tc6 *tc6, const u8 *mac)
>> +{
>> + u32 regval;
>> +
>> + regval = (mac[3] << 24) | (mac[2] << 16) | (mac[1] << 8) | mac[0];
>> +
>> + return oa_tc6_write_register(tc6, LAN865X_REG_MAC_L_SADDR1, regval);
>> +}
>> +
>> +static int lan865x_set_hw_macaddr(struct lan865x_priv *priv, const u8 *mac)
>> +{
>> + int restore_ret;
>> + u32 regval;
>> + int ret;
>> +
>> + /* Configure MAC address low bytes */
>> + ret = lan865x_set_hw_macaddr_low_bytes(priv->tc6, mac);
>> + if (ret)
>> + return ret;
>> +
>> + /* Prepare and configure MAC address high bytes */
>> + regval = (mac[5] << 8) | mac[4];
>> + ret = oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_SADDR1,
>> + regval);
>> + if (!ret)
>> + return 0;
>> +
>> + /* Restore the old MAC address low bytes from netdev if the new MAC
>> + * address high bytes setting failed.
>> + */
>> + restore_ret = lan865x_set_hw_macaddr_low_bytes(priv->tc6,
>> + priv->netdev->dev_addr);
>> + if (restore_ret)
>> + return restore_ret;
>> +
>> + return ret;
>> +}
>> +
>> +static void
>> +lan865x_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
>> +{
>> + strscpy(info->driver, DRV_NAME, sizeof(info->driver));
>> + strscpy(info->bus_info, dev_name(netdev->dev.parent),
>> + sizeof(info->bus_info));
>> +}
>> +
>> +static const struct ethtool_ops lan865x_ethtool_ops = {
>> + .get_drvinfo = lan865x_get_drvinfo,
>> + .get_link_ksettings = phy_ethtool_get_link_ksettings,
>> + .set_link_ksettings = phy_ethtool_set_link_ksettings,
>> +};
>> +
>> +static int lan865x_set_mac_address(struct net_device *netdev, void *addr)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> + struct sockaddr *address = addr;
>> + int ret;
>> +
>> + ret = eth_prepare_mac_addr_change(netdev, addr);
>> + if (ret < 0)
>> + return ret;
>> +
>> + if (ether_addr_equal(address->sa_data, netdev->dev_addr))
>> + return 0;
>> +
>> + ret = lan865x_set_hw_macaddr(priv, address->sa_data);
>> + if (ret)
>> + return ret;
>> +
>> + eth_commit_mac_addr_change(netdev, address->sa_data);
>> +
>> + return 0;
>> +}
>> +
>> +static u32 get_address_bit(u8 addr[ETH_ALEN], u32 bit)
>> +{
>> + return ((addr[bit / 8]) >> (bit % 8)) & 1;
>> +}
>> +
>> +static u32 lan865x_hash(u8 addr[ETH_ALEN])
>> +{
>> + u32 hash_index = 0;
>> +
>> + for (int i = 0; i < 6; i++) {
>> + u32 hash = 0;
>> +
>> + for (int j = 0; j < 8; j++)
>> + hash ^= get_address_bit(addr, (j * 6) + i);
>> +
>> + hash_index |= (hash << i);
>> + }
>> +
>> + return hash_index;
>> +}
>> +
>> +static void lan865x_set_specific_multicast_addr(struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> + struct netdev_hw_addr *ha;
>> + u32 hash_lo = 0;
>> + u32 hash_hi = 0;
>> +
>> + netdev_for_each_mc_addr(ha, netdev) {
>> + u32 bit_num = lan865x_hash(ha->addr);
>> +
>> + if (bit_num >= BIT(5))
>> + hash_hi |= (1 << (bit_num - BIT(5)));
>> + else
>> + hash_lo |= (1 << bit_num);
>> + }
>> +
>> + /* Enabling specific multicast addresses */
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_HASH, hash_hi)) {
>> + netdev_err(netdev, "Failed to write reg_hashh");
>> + return;
>> + }
>> +
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_L_HASH, hash_lo))
>> + netdev_err(netdev, "Failed to write reg_hashl");
>> +}
>> +
>> +static void lan865x_multicast_work_handler(struct work_struct *work)
>> +{
>> + struct lan865x_priv *priv = container_of(work, struct lan865x_priv,
>> + multicast_work);
>> + u32 regval = 0;
>> +
>> + if (priv->netdev->flags & IFF_PROMISC) {
>> + /* Enabling promiscuous mode */
>> + regval |= MAC_NET_CFG_PROMISCUOUS_MODE;
>> + regval &= (~MAC_NET_CFG_MULTICAST_MODE);
>> + regval &= (~MAC_NET_CFG_UNICAST_MODE);
>> + } else if (priv->netdev->flags & IFF_ALLMULTI) {
>> + /* Enabling all multicast mode */
>> + regval &= (~MAC_NET_CFG_PROMISCUOUS_MODE);
>> + regval |= MAC_NET_CFG_MULTICAST_MODE;
>> + regval &= (~MAC_NET_CFG_UNICAST_MODE);
>> + } else if (!netdev_mc_empty(priv->netdev)) {
>> + lan865x_set_specific_multicast_addr(priv->netdev);
>> + regval &= (~MAC_NET_CFG_PROMISCUOUS_MODE);
>> + regval &= (~MAC_NET_CFG_MULTICAST_MODE);
>> + regval |= MAC_NET_CFG_UNICAST_MODE;
>> + } else {
>> + /* enabling local mac address only */
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_HASH,
>> + 0)) {
>> + netdev_err(priv->netdev, "Failed to write reg_hashh");
>> + return;
>> + }
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_L_HASH,
>> + 0)) {
>> + netdev_err(priv->netdev, "Failed to write reg_hashl");
>> + return;
>> + }
>> + }
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CFG, regval))
>> + netdev_err(priv->netdev,
>> + "Failed to enable promiscuous/multicast/normal mode");
>> +}
>> +
>> +static void lan865x_set_multicast_list(struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> +
>> + schedule_work(&priv->multicast_work);
>> +}
>> +
>> +static netdev_tx_t lan865x_send_packet(struct sk_buff *skb,
>> + struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> +
>> + return oa_tc6_start_xmit(priv->tc6, skb);
>> +}
>> +
>> +static int lan865x_hw_disable(struct lan865x_priv *priv)
>> +{
>> + u32 regval;
>> +
>> + if (oa_tc6_read_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, ®val))
>> + return -ENODEV;
>> +
>> + regval &= ~(MAC_NET_CTL_TXEN | MAC_NET_CTL_RXEN);
>> +
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, regval))
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> +static int lan865x_net_close(struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> + int ret;
>> +
>> + netif_stop_queue(netdev);
>> + phy_stop(netdev->phydev);
>> + ret = lan865x_hw_disable(priv);
>> + if (ret) {
>> + netdev_err(netdev, "Failed to disable the hardware: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int lan865x_hw_enable(struct lan865x_priv *priv)
>> +{
>> + u32 regval;
>> +
>> + if (oa_tc6_read_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, ®val))
>> + return -ENODEV;
>> +
>> + regval |= MAC_NET_CTL_TXEN | MAC_NET_CTL_RXEN;
>> +
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, regval))
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> +static int lan865x_net_open(struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> + int ret;
>> +
>> + ret = lan865x_hw_enable(priv);
>> + if (ret) {
>> + netdev_err(netdev, "Failed to enable hardware: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + phy_start(netdev->phydev);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct net_device_ops lan865x_netdev_ops = {
>> + .ndo_open = lan865x_net_open,
>> + .ndo_stop = lan865x_net_close,
>> + .ndo_start_xmit = lan865x_send_packet,
>> + .ndo_set_rx_mode = lan865x_set_multicast_list,
>> + .ndo_set_mac_address = lan865x_set_mac_address,
>> +};
>> +
>> +static int lan865x_probe(struct spi_device *spi)
>> +{
>> + struct net_device *netdev;
>> + struct lan865x_priv *priv;
>> + int ret;
>> +
>> + netdev = alloc_etherdev(sizeof(struct lan865x_priv));
>> + if (!netdev)
>> + return -ENOMEM;
>> +
>> + priv = netdev_priv(netdev);
>> + priv->netdev = netdev;
>> + priv->spi = spi;
>> + spi_set_drvdata(spi, priv);
>> + INIT_WORK(&priv->multicast_work, lan865x_multicast_work_handler);
>> +
>> + priv->tc6 = oa_tc6_init(spi, netdev);
>> + if (!priv->tc6) {
>> + ret = -ENODEV;
>> + goto free_netdev;
>> + }
>> +
>> + /* As per the point s3 in the below errata, SPI receive Ethernet frame
>> + * transfer may halt when starting the next frame in the same data block
>> + * (chunk) as the end of a previous frame. The RFA field should be
>> + * configured to 01b or 10b for proper operation. In these modes, only
>> + * one receive Ethernet frame will be placed in a single data block.
>> + * When the RFA field is written to 01b, received frames will be forced
>> + * to only start in the first word of the data block payload (SWO=0). As
>> + * recommended, enable zero align receive frame feature for proper
>> + * operation.
>> + *
>> + * https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/Errata/LAN8650-1-Errata-80001075.pdf
>> + */
>> + ret = oa_tc6_zero_align_receive_frame_enable(priv->tc6);
>> + if (ret) {
>> + dev_err(&spi->dev, "Failed to set ZARFE: %d\n", ret);
>> + goto oa_tc6_exit;
>> + }
>> +
>> + /* Get the MAC address from the SPI device tree node */
>> + if (device_get_ethdev_address(&spi->dev, netdev))
>> + eth_hw_addr_random(netdev);
>> +
>> + ret = lan865x_set_hw_macaddr(priv, netdev->dev_addr);
>> + if (ret) {
>> + dev_err(&spi->dev, "Failed to configure MAC: %d\n", ret);
>> + goto oa_tc6_exit;
>> + }
>> +
>> + netdev->if_port = IF_PORT_10BASET;
>> + netdev->irq = spi->irq;
>> + netdev->netdev_ops = &lan865x_netdev_ops;
>> + netdev->ethtool_ops = &lan865x_ethtool_ops;
>> +
>> + ret = register_netdev(netdev);
>> + if (ret) {
>> + dev_err(&spi->dev, "Register netdev failed (ret = %d)", ret);
>> + goto oa_tc6_exit;
>> + }
>> +
>> + return 0;
>> +
>> +oa_tc6_exit:
>> + oa_tc6_exit(priv->tc6);
>> +free_netdev:
>> + free_netdev(priv->netdev);
>> + return ret;
>> +}
>> +
>> +static void lan865x_remove(struct spi_device *spi)
>> +{
>> + struct lan865x_priv *priv = spi_get_drvdata(spi);
>> +
>> + cancel_work_sync(&priv->multicast_work);
>> + unregister_netdev(priv->netdev);
>> + oa_tc6_exit(priv->tc6);
>> + free_netdev(priv->netdev);
>> +}
>> +
>> +static const struct spi_device_id spidev_spi_ids[] = {
>> + { .name = "lan8650" },
>> + {},
>> +};
>> +
>> +static const struct of_device_id lan865x_dt_ids[] = {
>> + { .compatible = "microchip,lan8650" },
>> + { /* Sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, lan865x_dt_ids);
>> +
>> +static struct spi_driver lan865x_driver = {
>> + .driver = {
>> + .name = DRV_NAME,
>> + .of_match_table = lan865x_dt_ids,
>> + },
>> + .probe = lan865x_probe,
>> + .remove = lan865x_remove,
>> + .id_table = spidev_spi_ids,
>> +};
>> +module_spi_driver(lan865x_driver);
>> +
>> +MODULE_DESCRIPTION(DRV_NAME " 10Base-T1S MACPHY Ethernet Driver");
>> +MODULE_AUTHOR("Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.34.1