[PATCH 0/4] ad7124 fixes and improvements

[Dumitru Ceclan]

This patch series adds fixes and improvements in the ad7124 driver.

Fixes:
- properly compare config values
- add a delay after reset to allow chip initialization

Improvements:
- reduce the number of SPI transfers
- ensure that after probe the ADC is in idle mode
  and not continuos conversion mode

Another thing that could be considered is improving the config pop
behavior as kfifo_get() will return the least recently added config
instead of the least recently *used* one.

This could be an issue when multiple channels are using the same "old"
config and the LRU considers that one as the least recently used.

If this is considered a valid issue, I can add another patch for it.

Signed-off-by: Dumitru Ceclan <dumitru.ceclan@xxxxxxxxxx>
---
Dumitru Ceclan (4):
      iio: adc: ad7124: fix chip ID mismatch
      iio: adc: ad7124: fix config comparison
      iio: adc: ad7124: reduce the number of SPI transfers
      iio: adc: ad7124: set initial ADC mode to idle

 drivers/iio/adc/ad7124.c | 61 ++++++++++++++++++++++++------------------------
 1 file changed, 31 insertions(+), 30 deletions(-)
---
base-commit: 380afccc2a55e8015adae4266e8beff96ab620be
change-id: 20240731-ad7124-fix-37aec7fe0b6b

Best regards,
-- 
Dumitru Ceclan <dumitru.ceclan@xxxxxxxxxx>