Re: [PATCH RFC 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs

[Rob Herring (Arm)]

On Wed, 31 Jul 2024 09:48:03 -0400, Trevor Gamblin wrote:
> This adds a binding specification for the Analog Devices Inc. AD7625,
> AD7626, AD7960, and AD7961 ADCs.
> 
> Signed-off-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/adc/adi,ad7625.yaml    | 176 +++++++++++++++++++++
>  MAINTAINERS                                        |   9 ++
>  2 files changed, 185 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml:120:1: [error] syntax error: expected <block end>, but found '-' (syntax)

dtschema/dtc warnings/errors:
make[2]: *** Deleting file 'Documentation/devicetree/bindings/iio/adc/adi,ad7625.example.dts'
Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml:120:1: did not find expected key
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/iio/adc/adi,ad7625.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml:120:1: did not find expected key
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml: ignoring, error parsing file
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240731-ad7625_r1-v1-1-a1efef5a2ab9@xxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.