Re: [PATCH v2 3/3] arm64: dts: ti: Add support for J742S2 EVM board

[Manorit Chawdhry]

Hi Andrew,

On 09:46-20240731, Andrew Davis wrote:
> On 7/30/24 2:13 AM, Manorit Chawdhry wrote:
> > J742S2 EVM board is designed for TI J742S2 SoC. It supports the following
> > interfaces:
> > * 16 GB DDR4 RAM
> > * x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
> > * x1 Input Audio Jack, x1 Output Audio Jack
> > * x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
> > * x1 4L PCIe connector
> > * x1 UHS-1 capable micro-SD card slot
> > * 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
> >    UFS flash.
> > * x6 UART through UART-USB bridge
> > * XDS110 for onboard JTAG debug using USB
> > * Temperature sensors, user push buttons and LEDs
> > * x1 GESI expander, x2 Display connector
> > * x1 15-pin CSI header
> > * x6 MCAN instances
> > 
> > Link: https://www.ti.com/lit/ug/sprujd8/sprujd8.pdf (EVM user guide)
> > Link: https://www.ti.com/lit/zip/SPAC001 (Schematics)
> > Signed-off-by: Manorit Chawdhry <m-chawdhry@xxxxxx>
> > ---
> >   arch/arm64/boot/dts/ti/Makefile                  |    3 +
> >   arch/arm64/boot/dts/ti/k3-j742s2-evm.dts         |   26 +
> >   arch/arm64/boot/dts/ti/k3-j784s4-evm-common.dtsi | 1436 +++++++++++++++++++++
> 
> Seems git is not seeing that this is a copy.
> When you do format-patch try using "-C".

Am using b4 for sending patches.. though I think there are some delta
changes as well so maybe that's why it ain't picking up. I think will
try to do it similary to j722s and am62p split up to make it clear for
the changes happening as well.

Regards,
Manorit

> 
> Andrew