[PATCH v24 19/34] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device

[Wesley Cheng]

The USB SND path may need to know how the USB offload path is routed, so
that applications can open the proper sound card and PCM device.  The
implementation for the QC ASoC design has a "USB Mixer" kcontrol for each
possible FE (Q6ASM) DAI, which can be utilized to know which front end link
is enabled.

When an application/userspace queries for the mapped offload devices, the
logic will lookup the USB mixer status though the following path:

MultiMedia* <-> MM_DL* <-> USB Mixer*

The "USB Mixer" is a DAPM widget, and the q6routing entity will set the
DAPM connect status accordingly if the USB mixer is enabled.  If enabled,
the Q6USB backend link can fetch the PCM device number from the FE DAI
link (Multimedia*).  With respects to the card number, that is
straightfoward, as the ASoC components have direct references to the ASoC
platform sound card.

An example output can be shown below:

Number of controls: 9
name                                    value
Capture Channel Map                     0, 0 (range 0->36)
Playback Channel Map                    0, 0 (range 0->36)
Headset Capture Switch                  On
Headset Capture Volume                  1 (range 0->4)
Sidetone Playback Switch                On
Sidetone Playback Volume                4096 (range 0->8192)
Headset Playback Switch                 On
Headset Playback Volume                 20, 20 (range 0->24)
USB Offload Playback Route PCM#0        0, 1 (range -1->255)

The "USB Offload Playback Route PCM#*" kcontrol will signify the
corresponding card and pcm device it is offload to. (card#0 pcm - device#1)
If the USB SND device supports multiple audio interfaces, then it will
contain several PCM streams, hence in those situations, it is expected
that there will be multiple playback route kcontrols created.

Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
---
 sound/soc/qcom/qdsp6/q6usb.c | 89 ++++++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
index 36c441d621fb..d8f1bb4ec497 100644
--- a/sound/soc/qcom/qdsp6/q6usb.c
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -124,6 +124,94 @@ static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *compone
 	return ret;
 }
 
+static int q6usb_get_pcm_id_from_widget(struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_pcm_runtime *rtd;
+	struct snd_soc_dai *dai;
+
+	for_each_card_rtds(w->dapm->card, rtd) {
+		dai = snd_soc_rtd_to_cpu(rtd, 0);
+		/*
+		 * Only look for playback widget. RTD number carries the assigned
+		 * PCM index.
+		 */
+		if (dai->stream[0].widget == w)
+			return rtd->num;
+	}
+
+	return -1;
+}
+
+static int q6usb_usb_mixer_enabled(struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_dapm_path *p;
+
+	/* Checks to ensure USB path is enabled/connected */
+	snd_soc_dapm_widget_for_each_sink_path(w, p)
+		if (!strcmp(p->sink->name, "USB Mixer") && p->connect)
+			return 1;
+
+	return 0;
+}
+
+static int q6usb_get_pcm_id(struct snd_soc_component *component)
+{
+	struct snd_soc_dapm_widget *w;
+	struct snd_soc_dapm_path *p;
+	int pidx;
+
+	/*
+	 * Traverse widgets to find corresponding FE widget.  The DAI links are
+	 * built like the following:
+	 *    MultiMedia* <-> MM_DL* <-> USB Mixer*
+	 */
+	for_each_card_widgets(component->card, w) {
+
+		if (!strncmp(w->name, "MultiMedia", 10)) {
+			/*
+			 * Look up all paths associated with the FE widget to see if
+			 * the USB BE is enabled.  The sink widget is responsible to
+			 * link with the USB mixers.
+			 */
+			snd_soc_dapm_widget_for_each_sink_path(w, p) {
+				if (q6usb_usb_mixer_enabled(p->sink)) {
+					pidx = q6usb_get_pcm_id_from_widget(w);
+					return pidx;
+				}
+			}
+		}
+	}
+
+	return -1;
+}
+
+static int q6usb_get_offload_dev(struct snd_soc_component *component,
+				 int card, int pcm, enum snd_soc_usb_kctl route)
+{
+	struct q6usb_port_data *data = dev_get_drvdata(component->dev);
+	struct snd_soc_usb_device *sdev;
+	int ret = -1;
+
+	mutex_lock(&data->mutex);
+
+	if (list_empty(&data->devices))
+		goto out;
+
+	sdev = list_last_entry(&data->devices, struct snd_soc_usb_device, list);
+
+	if ((card == sdev->card_idx) && (pcm == sdev->pcm_idx)) {
+		if (route == SND_SOC_USB_KCTL_CARD_ROUTE)
+			ret = component->card->snd_card->number;
+		else if (route == SND_SOC_USB_KCTL_PCM_ROUTE)
+			ret = q6usb_get_pcm_id(component);
+	}
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
 static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
 			struct snd_soc_usb_device *sdev, bool connected)
 {
@@ -193,6 +281,7 @@ static int q6usb_component_probe(struct snd_soc_component *component)
 		return -ENOMEM;
 
 	usb->connection_status_cb = q6usb_alsa_connection_cb;
+	usb->get_offload_dev = q6usb_get_offload_dev;
 
 	snd_soc_usb_add_port(usb);
 	data->usb = usb;