RE: [PATCH 3/3] arm64: dts: Add phyBOARD-Pollux dts for rpmsg
From: Peng Fan
Date: Wed Jul 31 2024 - 22:28:35 EST
> Subject: [PATCH 3/3] arm64: dts: Add phyBOARD-Pollux dts for rpmsg
>
> Adds a devicetree containing reserved memory regions used for
> intercore communication between A53 and M7 cores.
>
> Signed-off-by: Yashwanth Varakala <y.varakala@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 2 +
> .../dts/freescale/imx8mp-phycore-rpmsg.dtso | 57
> +++++++++++++++++++
> 2 files changed, 59 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-
> phycore-rpmsg.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile
> index dedea4b5c319..80cc87d50301 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -177,9 +177,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-
> phyboard-pollux-rdk.dtb imx8mp-phyboard-pollux-rdk-no-eth-dtbs +=
> imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
> imx8mp-phyboard-pollux-rdk-no-rtc-dtbs += imx8mp-phyboard-pollux-
> rdk.dtb imx8mp-phycore-no-rtc.dtbo imx8mp-phyboard-pollux-rdk-no-
> spiflash-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-
> spiflash.dtbo
> +imx8mp-phyboard-pollux-rdk-rpmsg-dtbs += imx8mp-phyboard-
> pollux-rdk.dtb
> +imx8mp-phycore-rpmsg.dtbo
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-
> eth.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-rtc.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-
> spiflash.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-
> rpmsg.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-
> rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phycore-
> rpmsg.dtso
> new file mode 100644
> index 000000000000..a5694f3aecaa
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-rpmsg.dtso
> @@ -0,0 +1,57 @@
> +// SPDX-License-Identifier: GPL-2.0
Dual license is better device tree.
> +/*
> + * Copyright (C) 2024 PHYTEC Messtechnik GmbH
> + * Author: Dominik Haller <d.haller@xxxxxxxxx>
> + * Cem Tenruh <c.tenruh@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/clock/imx8mp-clock.h>
> +
> +&{/} {
> + imx8mp-cm7 {
> + compatible = "fsl,imx8mn-cm7";
> + clocks = <&clk IMX8MP_CLK_M7_DIV>;
> + mboxes = <&mu 0 1
> + &mu 1 1
> + &mu 3 1>;
mboxes = <&mu1 0 1>,
<&mu1 1 1>,
<&mu1 3 1>;
> + mbox-names = "tx", "rx", "rxdb";
> + memory-region = <&vdevbuffer>, <&vdev0vring0>,
> <&vdev0vring1>, <&rsc_table>;
> + rsc-da = <0x55000000>;
Drop this "rsc-da".
> + status = "okay";
Drop it, default is "okay".
> + };
> +
> + reserved-memory {
> + ranges;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + m7_reserved: m7@0x80000000 {
> + no-map;
> + reg = <0 0x80000000 0 0x1000000>;
> + };
> +
> + rsc_table: rsc_table@550ff000 {
"rsc-table@550ff000". Seems you not test this patch with linux
remoteproc, otherwise you will see vring not set up.
Regards,
Peng.