Re: [PATCH net-next] net: skbuff: Skip early return in skb_unref when debugging

From: Paolo Abeni
Date: Thu Aug 01 2024 - 05:07:44 EST




On 7/31/24 13:24, Breno Leitao wrote:
Hello Paolo,

On Tue, Jul 30, 2024 at 11:38:38AM +0200, Paolo Abeni wrote:
Could you please benchmark such scenario before and after this patch?

I've tested it on a 18-core Xeon D-2191A host, and I haven't found any
different in either TX/RX in TCP or UDP. At the same time, I must admit
that I have very low confidence in my tests.

I run the following tests for 10x on the same machine, just changing my
patch, and I getting the simple average of these 10 iterations. This is
what I am doing for TCP and UDP:

TCP:
# iperf -s &
# iperf -u -c localhost

Output: 16.5 Gbits/sec

UDP:
# iperf -s -u &
# iperf -u -c localhost

Output: 1.05 Mbits/sec

I don't know how to explain why UDP numbers are so low. I am happy to
run different tests, if you have any other recommendation.

Beyond the '-b 0' argument, as noted by Jason, you need to do manual CPU pinning of both the sender and the receiver. Additionally, to really flood the receiver you likely have to place the sender on a different host.

In any case, given all the prior discussion, I don't intend to block this patch.

Cheers,

Paolo