Re: [PATCH v1 1/1] mfd: rk8xx: Fix shutdown handler

[Sebastian Reichel]

Hi,

On Thu, Aug 01, 2024 at 07:41:44PM GMT, Heiko Stübner wrote:
> Am Donnerstag, 1. August 2024, 17:31:33 CEST schrieb Dmitry Osipenko:
> > On 7/30/24 21:05, Sebastian Reichel wrote:
> > > +	/*
> > > +	 * Currently the Rockchip SPI driver always sleeps when doing SPI
> > > +	 * transfers. This is not allowed in the SYS_OFF_MODE_POWER_OFF
> > > +	 * handler, so we are using the prepare handler as a workaround.
> > > +	 * This should be removed once the Rockchip SPI driver has been
> > > +	 * adapted.
> > > +	 */
> > > +	if (is_spi)
> > > +		pwr_off_mode = SYS_OFF_MODE_POWER_OFF_PREPARE;
> > 
> > This prevents the syscore_shutdown() step from execution. Is it better
> > than not powering off?
> > 
> > I'd rather skip registration of the power-off handlers in a case of SPI :)
> 
> Or blasphemous thought, we could live with the warning-splash for a bit.
> 
> From Sebastian's log I assume the WARNING comes from the
> wait_for_completion() in spi_transfer_wait(), and I guess the transfer
> with the poweroff command itself will already have happened then?
> 
> So the device is most likely still powered off in that case?
> Not sure how much of "bad taste" that thought is though ;-)

Yes, as far as I could see it works fine (the splash from the commit
message is from exactly this solution running on RK3588 EVB1 and the
board was powered off properly as far as I can tell). But it felt a
bit strange to knowingly introduce an error splash in a fix intended
for being backported to the stable trees, so I switched to the current
version before sending.

-- Sebastian

Attachment: signature.asc
Description: PGP signature