Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615

[Rob Herring (Arm)]

On Sat, 03 Aug 2024 08:52:47 +0530, Krishna chaitanya chundru wrote:
> Add binding describing the Qualcomm PCIe switch, QPS615,
> which provides Ethernet MAC integrated to the 3rd downstream port
> and two downstream PCIe ports.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/qcom,qps615.yaml       | 191 +++++++++++++++++++++
>  1 file changed, 191 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pci/qcom,qps615.example.dts:33.26-101.19: Warning (pci_device_bus_num): /example-0/pcie/pcie@0/pcie@0,0: PCI bus number 1 out of range, expected (0 - 0)
Documentation/devicetree/bindings/pci/qcom,qps615.example.dts:52.30-60.23: Warning (pci_device_bus_num): /example-0/pcie/pcie@0/pcie@0,0/pcie@1,0: PCI bus number 2 out of range, expected (0 - 0)
Documentation/devicetree/bindings/pci/qcom,qps615.example.dts:62.30-70.23: Warning (pci_device_bus_num): /example-0/pcie/pcie@0/pcie@0,0/pcie@2,0: PCI bus number 2 out of range, expected (0 - 0)
Documentation/devicetree/bindings/pci/qcom,qps615.example.dts:72.30-100.23: Warning (pci_device_bus_num): /example-0/pcie/pcie@0/pcie@0,0/pcie@3,0: PCI bus number 2 out of range, expected (0 - 0)
Documentation/devicetree/bindings/pci/qcom,qps615.example.dts:81.39-89.32: Warning (pci_device_bus_num): /example-0/pcie/pcie@0/pcie@0,0/pcie@3,0/pcie@0,0: PCI bus number 4 out of range, expected (0 - 0)
Documentation/devicetree/bindings/pci/qcom,qps615.example.dts:91.39-99.32: Warning (pci_device_bus_num): /example-0/pcie/pcie@0/pcie@0,0/pcie@3,0/pcie@0,1: PCI bus number 4 out of range, expected (0 - 0)

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240803-qps615-v2-1-9560b7c71369@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.