[PATCH v9 3/3] dt-bindings: input: Update dtbinding for adp5588

[Utsav Agarwal via B4 Relay]

From: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx>

Updating dt bindings for adp5588. Since the device can now function in a
purely gpio mode, the following keypad specific properties are now made
optional:
	- interrupts
	- keypad,num-rows
	- keypad,num-columns
	- linux,keymap

However the above properties are required to be specified when
configuring the device as a keypad, dependencies have been added
such that specifying either one would require the remaining as well.

Note that interrupts are optional, but required when the device has
either been configured in keypad mode or as an interrupt controller.

Signed-off-by: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx>
---
 .../devicetree/bindings/input/adi,adp5588.yaml     | 51 +++++++++++++++++++---
 1 file changed, 45 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
index 26ea66834ae2..827d72ece54b 100644
--- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -49,7 +49,12 @@ properties:
   interrupt-controller:
     description:
       This property applies if either keypad,num-rows lower than 8 or
-      keypad,num-columns lower than 10.
+      keypad,num-columns lower than 10. This property is optional if
+      keypad,num-rows or keypad,num-columns are not specified since the
+      device then acts as gpio only, during which interrupts may or may
+      not be utilized. If specified however, interrupts must be also be
+      provided as all interrupt communication is handled via a single
+      interrupt line.
 
   '#interrupt-cells':
     const: 2
@@ -65,13 +70,30 @@ properties:
     minItems: 1
     maxItems: 2
 
+
+dependencies:
+  keypad,num-rows:
+    - linux,keymap
+    - keypad,num-columns
+  keypad,num-columns:
+    - linux,keymap
+    - keypad,num-rows
+  linux,keymap:
+    - keypad,num-rows
+    - keypad,num-columns
+  interrupt-controller:
+    - interrupts
+
+if:
+  required:
+    - linux,keymap
+then:
+  required:
+    - interrupts
+
 required:
   - compatible
   - reg
-  - interrupts
-  - keypad,num-rows
-  - keypad,num-columns
-  - linux,keymap
 
 unevaluatedProperties: false
 
@@ -108,4 +130,21 @@ examples:
             >;
         };
     };
-...
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpio@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            #gpio-cells = <2>;
+            gpio-controller;
+        };
+    };
+
+.

-- 
2.34.1