[PATCH] ARM: pxa/gumstix: fix attaching properties to vbus gpio device

[Dmitry Torokhov]

Commit f1d6588af93b tried to convert GPIO lookup tables to software
properties for the vbus gpio device, bit forgot the most important
step: actually attaching the new properties to the device.

Also fix up the name of the property array to reflect the board name,
and add missing gpio/property.h and devices.h includes absence of which
causes compile failures on some configurations.

Switch "#ifdef CONFIG_USB_PXA25X" to "#if IS_ENABLED(CONFIG_USB_PXA25X)"
because it should not matter if the driver is buolt in or a module, it
still need vbus controls.

Reported-by: Arnd Bergmann <arnd@xxxxxxxx>
Fixes: f1d6588af93b ("ARM: pxa/gumstix: convert vbus gpio to use software nodes")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
 arch/arm/mach-pxa/gumstix.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index efa6faa62a2c..1713bdf3b71e 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -21,6 +21,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -40,6 +41,7 @@
 #include <linux/platform_data/mmc-pxamci.h>
 #include "udc.h"
 #include "gumstix.h"
+#include "devices.h"
 
 #include "generic.h"
 
@@ -99,8 +101,8 @@ static void __init gumstix_mmc_init(void)
 }
 #endif
 
-#ifdef CONFIG_USB_PXA25X
-static const struct property_entry spitz_mci_props[] __initconst = {
+#if IS_ENABLED(CONFIG_USB_PXA25X)
+static const struct property_entry gumstix_vbus_props[] __initconst = {
 	PROPERTY_ENTRY_GPIO("vbus-gpios", &pxa2xx_gpiochip_node,
 			    GPIO_GUMSTIX_USB_GPIOn, GPIO_ACTIVE_HIGH),
 	PROPERTY_ENTRY_GPIO("pullup-gpios", &pxa2xx_gpiochip_node,
@@ -109,8 +111,9 @@ static const struct property_entry spitz_mci_props[] __initconst = {
 };
 
 static const struct platform_device_info gumstix_gpio_vbus_info __initconst = {
-	.name	= "gpio-vbus",
-	.id	= PLATFORM_DEVID_NONE,
+	.name		= "gpio-vbus",
+	.id		= PLATFORM_DEVID_NONE,
+	.properties	= gumstix_vbus_props,
 };
 
 static void __init gumstix_udc_init(void)
-- 
2.46.0.rc2.264.g509ed76dc8-goog