Re: [PATCH v1] can: mcp251xfd: Enable transceiver using gpio

[Marc Kleine-Budde]

On 06.08.2024 14:33:39, Anup Kulkarni wrote:
> Ensure the CAN transceiver is active during mcp251xfd_open() and
> inactive during mcp251xfd_close() by utilizing
> mcp251xfd_transceiver_mode(). Adjust GPIO_0 to switch between
> NORMAL and STANDBY modes of transceiver.

There is still the gpio support patch pending, which I have to review
and test.

https://lore.kernel.org/all/20240522-mcp251xfd-gpio-feature-v3-0-8829970269c5@xxxxxxxxxxxxxxx/

After this has been merged, we can have a look at this patch.

It might actually not be needed anymore, as we can describe a CAN
transceiver switched by a GPIO in the DT. Hopefully we don't run into
some crazy circular dependencies or similar issues.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature