[PATCH v2 1/6] arm64: dts: fsl-ls1028a: remove undocumented 'little-endian' for dspi node

[Frank Li]

According to binding doc http://devicetree.org/schemas/spi/fsl,dspi.yaml
and driver drivers/spi/spi-fsl-dspi.c, default is little-endian, should
use big-endian for big-endian system. Remove 'little-endian' to fix below
warning:

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtb: spi@2100000: Unevaluated properties are not allowed ('little-endian' was unexpected)

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index acf293310f7a0..36e23d7b1676b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -381,7 +381,6 @@ dspi0: spi@2100000 {
 			dmas = <&edma0 0 62>, <&edma0 0 60>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
-			little-endian;
 			status = "disabled";
 		};
 
@@ -397,7 +396,6 @@ dspi1: spi@2110000 {
 			dmas = <&edma0 0 58>, <&edma0 0 56>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
-			little-endian;
 			status = "disabled";
 		};
 
@@ -413,7 +411,6 @@ dspi2: spi@2120000 {
 			dmas = <&edma0 0 54>, <&edma0 0 2>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <3>;
-			little-endian;
 			status = "disabled";
 		};
 

-- 
2.34.1