[PATCH 2/4] dt-bindings: PCI: drop layerscape-pcie-gen4.txt

From: Frank Li
Date: Thu Aug 08 2024 - 12:03:07 EST


lx2160 rev1 use mobivel PCIe controller and switch to designware PCIe
controller at rev2, which is mass production version. So drop unused
document.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
.../bindings/pci/layerscape-pcie-gen4.txt | 52 ----------------------
1 file changed, 52 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
deleted file mode 100644
index b40fb5d15d3d9..0000000000000
--- a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-NXP Layerscape PCIe Gen4 controller
-
-This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
-the common properties defined in mobiveil-pcie.txt.
-
-Required properties:
-- compatible: should contain the platform identifier such as:
- "fsl,lx2160a-pcie"
-- reg: base addresses and lengths of the PCIe controller register blocks.
- "csr_axi_slave": Bridge config registers
- "config_axi_slave": PCIe controller registers
-- interrupts: A list of interrupt outputs of the controller. Must contain an
- entry for each entry in the interrupt-names property.
-- interrupt-names: It could include the following entries:
- "intr": The interrupt that is asserted for controller interrupts
- "aer": Asserted for aer interrupt when chip support the aer interrupt with
- none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
- "pme": Asserted for pme interrupt when chip support the pme interrupt with
- none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
-- dma-coherent: Indicates that the hardware IP block can ensure the coherency
- of the data transferred from/to the IP block. This can avoid the software
- cache flush/invalid actions, and improve the performance significantly.
-- msi-parent : See the generic MSI binding described in
- Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-Example:
-
- pcie@3400000 {
- compatible = "fsl,lx2160a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x80 0x00000000 0x0 0x00001000>; /* configuration space */
- reg-names = "csr_axi_slave", "config_axi_slave";
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
- interrupt-names = "aer", "pme", "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- apio-wins = <8>;
- ppio-wins = <8>;
- dma-coherent;
- bus-range = <0x0 0xff>;
- msi-parent = <&its>;
- ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- };

--
2.34.1