Re: [PATCH] dts: freescale: imx8mp-phyboard-pollux-rdk: Add console UART bootargs

From: Benjamin Hahn
Date: Fri Aug 09 2024 - 03:19:58 EST


On 08.08.24 12:13, Krzysztof Kozlowski wrote:
> On 08/08/2024 11:34, Benjamin Hahn wrote:
>> Pass the console UART bootargs parameter via the devicetree for booting
>> EFI binaries.
>>
>> Signed-off-by: Benjamin Hahn <B.Hahn@xxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
>> index 00a240484c25..552b528fb663 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
>> @@ -16,6 +16,7 @@ / {
>> "phytec,imx8mp-phycore-som", "fsl,imx8mp";
>>
>> chosen {
>> + bootargs = "console=ttymxc0,115200";
> Sorry, but stdout is sufficient. If it is not, something else needs fixing.

Ok, looks like stdout-patch should indeed be sufficient for UEFI boot,
so this is not needed then.

Benjamin

>
> Best regards,
> Krzysztof
>