Re: [PATCH v2 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs

[Krzysztof Kozlowski]

On 09/08/2024 20:41, Trevor Gamblin wrote:
> Add a binding specification for the Analog Devices Inc. AD7625,
> AD7626, AD7960, and AD7961 ADCs.
> 

Thank you for your patch. There is something to discuss/improve.

> +allOf:
> +  - if:
> +      required:
> +        - ref-supply
> +    then:
> +      # refin-supply is not needed if ref-supply is given

Not needed or not allowed? Schema says the latter.

> +      properties:
> +        refin-supply: false
> +  - if:
> +      required:
> +        - refin-supply
> +    then:
> +      # ref-supply is not needed if refin-supply is given
> +      properties:
> +        ref-supply: false
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - adi,ad7625
> +              - adi,ad7626
> +    then:
> +      properties:
> +        en2-gpios: false
> +        en3-gpios: false
> +        adi,en2-always-on: false
> +        adi,en3-always-on: false
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - adi,ad7960
> +              - adi,ad7961
> +    then:
> +      # ad796x parts must have one of the two supplies
> +      oneOf:
> +        - required: [ref-supply]
> +        - required: [refin-supply]

That's duplicating first and second if. And all three - comment, first
if:then: and this one here is kind of contradictory so I don't know what
you want to achieve.


> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    adc {
> +        compatible = "adi,ad7625";
> +        vdd1-supply = <&supply_5V>;
> +        vdd2-supply = <&supply_2_5V>;
> +        vio-supply = <&supply_2_5V>;
> +        io-backends = <&axi_adc>;
> +        clocks = <&ref_clk>;
> +        pwms = <&axi_pwm_gen 0 0>, <&axi_pwm_gen 1 0>;
> +        pwm-names = "cnv", "clk_gate";

Make example complete - en0 or en1 GPIOs or whatever else is applicable.


Best regards,
Krzysztof