[PATCH v2] Documentation: networking: correct spelling

From: Jing-Ping Jan
Date: Mon Aug 12 2024 - 13:09:35 EST


Correct spelling problems for Documentation/networking/ as reported
by ispell.

Signed-off-by: Jing-Ping Jan <zoo868e@xxxxxxxxx>
---
Thank you Simon, for the review.
Changes in v2: corrected the grammer and added the missing spaces before
each '('.

Documentation/networking/ethtool-netlink.rst | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index d5f246aceb9f..4acde99e405e 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -934,18 +934,18 @@ Request contents:
==================================== ====== ===========================

Kernel checks that requested ring sizes do not exceed limits reported by
-driver. Driver may impose additional constraints and may not suspport all
+driver. Driver may impose additional constraints and may not support all
attributes.


``ETHTOOL_A_RINGS_CQE_SIZE`` specifies the completion queue event size.
-Completion queue events(CQE) are the events posted by NIC to indicate the
-completion status of a packet when the packet is sent(like send success or
-error) or received(like pointers to packet fragments). The CQE size parameter
+Completion queue events (CQE) are the events posted by NIC to indicate the
+completion status of a packet when the packet is sent (like send success or
+error) or received (like pointers to packet fragments). The CQE size parameter
enables to modify the CQE size other than default size if NIC supports it.
-A bigger CQE can have more receive buffer pointers inturn NIC can transfer
-a bigger frame from wire. Based on the NIC hardware, the overall completion
-queue size can be adjusted in the driver if CQE size is modified.
+A bigger CQE can have more receive buffer pointers, and in turn the NIC can
+transfer a bigger frame from wire. Based on the NIC hardware, the overall
+completion queue size can be adjusted in the driver if CQE size is modified.

CHANNELS_GET
============
@@ -989,7 +989,7 @@ Request contents:
===================================== ====== ==========================

Kernel checks that requested channel counts do not exceed limits reported by
-driver. Driver may impose additional constraints and may not suspport all
+driver. Driver may impose additional constraints and may not support all
attributes.


@@ -1927,7 +1927,7 @@ When set, the optional ``ETHTOOL_A_PLCA_VERSION`` attribute indicates which
standard and version the PLCA management interface complies to. When not set,
the interface is vendor-specific and (possibly) supplied by the driver.
The OPEN Alliance SIG specifies a standard register map for 10BASE-T1S PHYs
-embedding the PLCA Reconcialiation Sublayer. See "10BASE-T1S PLCA Management
+embedding the PLCA Reconciliation Sublayer. See "10BASE-T1S PLCA Management
Registers" at https://www.opensig.org/about/specifications/.

When set, the optional ``ETHTOOL_A_PLCA_ENABLED`` attribute indicates the
@@ -1989,7 +1989,7 @@ Request contents:
``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State
``ETHTOOL_A_PLCA_NODE_ID`` u8 PLCA unique local node ID
``ETHTOOL_A_PLCA_NODE_CNT`` u8 Number of PLCA nodes on the
- netkork, including the
+ network, including the
coordinator
``ETHTOOL_A_PLCA_TO_TMR`` u8 Transmit Opportunity Timer
value in bit-times (BT)
--
2.25.1