Re: [PATCH v2 0/7] arm64: dts: qcom: sc8180x: Enable the USB multiport controller
From: Steev Klimaszewski
Date: Mon Aug 12 2024 - 22:07:08 EST
On Tue, Jul 30, 2024 at 10:20 PM Bjorn Andersson <andersson@xxxxxxxxxx> wrote:
>
> The USB multiport controller found in SC8180X is used to driver the
> camera in the Lenovo Flex 5G, and a couple of additional USB ports on
> the Primus AUX board.
>
> ---
> Changes in v2:
> - Moved mp index last in DT labels
> - Dropped applied PHY patches, and sent dwc3 binding update separately
> - Spelled out GPIO_ACTIVE_HIGH as necessary
> - Moved status last in a few nodes
> - Corrected MP_PHY_PIPE_1_CLK
> - Link to v1: https://lore.kernel.org/r/20240525-sc8180x-usb-mp-v1-0-60a904392438@xxxxxxxxxxx
>
> ---
> Bjorn Andersson (7):
> dt-bindings: clock: qcom: Add missing USB MP resets
> clk: qcom: gcc-sc8180x: Add missing USB MP resets
> arm64: dts: qcom: sc8180x-pmics: Add second PMC8180 GPIO
> arm64: dts: qcom: sc8180x: Align USB nodes with binding
> arm64: dts: qcom: sc8180x: Add USB MP controller and phys
> arm64: dts: qcom: sc8180x-primus: Enable the two MP USB ports
> arm64: dts: qcom: sc8180x-lenovo-flex-5g: Enable USB multiport controller
>
> .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 34 ++++
> arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 16 +-
> arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 60 +++++++
> arch/arm64/boot/dts/qcom/sc8180x.dtsi | 181 +++++++++++++++++++--
> drivers/clk/qcom/gcc-sc8180x.c | 4 +
> include/dt-bindings/clock/qcom,gcc-sc8180x.h | 4 +
> 6 files changed, 285 insertions(+), 14 deletions(-)
> ---
> base-commit: 668d33c9ff922c4590c58754ab064aaf53c387dd
> change-id: 20240524-sc8180x-usb-mp-4eb278df7ef1
>
> Best regards,
> --
> Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
>
>
Tested here on the Lenovo Flex 5G with Cheese 44.1-1+b4 in Gnome 46,
have a working webcam, can record videos, and take pictures without
issue, and the webcam shows up as Bus 001 Device 002: ID 13d3:5419 IMC
Network Integrated Camera
Tested-by: Steev Klimaszewski <steev@xxxxxxxx>