[PATCH 1/6] media: ar0521: Refactor ar0521_power_off()

[Ricardo Ribalda]

Factor out all the power off logic, except the clk_disable_unprepare(),
to a new function __ar0521_power_off().

This allows ar0521_power_on() to explicitly clean-out the clock during
the error-path.

The following smatch warning is fixed:
drivers/media/i2c/ar0521.c:912 ar0521_power_on() warn: 'sensor->extclk' from clk_prepare_enable() not released on lines: 912.

Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
---
 drivers/media/i2c/ar0521.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c
index 09331cf95c62..2c528db31ba6 100644
--- a/drivers/media/i2c/ar0521.c
+++ b/drivers/media/i2c/ar0521.c
@@ -835,7 +835,7 @@ static const struct initial_reg {
 	     be(0x0707)), /* 3F44: couple k factor 2 */
 };
 
-static int ar0521_power_off(struct device *dev)
+static void __ar0521_power_off(struct device *dev)
 {
 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
 	struct ar0521_dev *sensor = to_ar0521_dev(sd);
@@ -850,6 +850,16 @@ static int ar0521_power_off(struct device *dev)
 		if (sensor->supplies[i])
 			regulator_disable(sensor->supplies[i]);
 	}
+}
+
+static int ar0521_power_off(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ar0521_dev *sensor = to_ar0521_dev(sd);
+
+	clk_disable_unprepare(sensor->extclk);
+	__ar0521_power_off(dev);
+
 	return 0;
 }
 
@@ -908,7 +918,8 @@ static int ar0521_power_on(struct device *dev)
 
 	return 0;
 off:
-	ar0521_power_off(dev);
+	clk_disable_unprepare(sensor->extclk);
+	__ar0521_power_off(dev);
 	return ret;
 }
 

-- 
2.46.0.76.ge559c4bf1a-goog