[PATCH v7 2/2] iio: light: ltr390: Calculate 'counts_per_uvi' dynamically

[Abhash Jha]

counts_per_uvi depends on the current value of gain and resolution.
Hence, we cannot use the hardcoded value 96.
The `counts_per_uvi` function gives the count based on the current gain
and resolution (integration time).

Signed-off-by: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
---
 drivers/iio/light/ltr390.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/ltr390.c b/drivers/iio/light/ltr390.c
index 16e06f2ab..7e58b50f3 100644
--- a/drivers/iio/light/ltr390.c
+++ b/drivers/iio/light/ltr390.c
@@ -46,6 +46,8 @@
 #define LTR390_UVS_MODE	      BIT(3)
 #define LTR390_SENSOR_ENABLE  BIT(1)
 
+#define LTR390_FRACTIONAL_PRECISION 100
+
 /*
  * At 20-bit resolution (integration time: 400ms) and 18x gain, 2300 counts of
  * the sensor are equal to 1 UV Index [Datasheet Page#8].
@@ -125,6 +127,14 @@ static int ltr390_set_mode(struct ltr390_data *data, enum ltr390_mode mode)
 	return 0;
 }
 
+static int ltr390_counts_per_uvi(struct ltr390_data *data)
+{
+	const int orig_gain = 18;
+	const int orig_int_time = 400;
+
+	return DIV_ROUND_CLOSEST(23 * data->gain * data->int_time_us, 10 * orig_gain * orig_int_time);
+}
+
 static int ltr390_read_raw(struct iio_dev *iio_device,
 			   struct iio_chan_spec const *chan, int *val,
 			   int *val2, long mask)
@@ -164,8 +174,8 @@ static int ltr390_read_raw(struct iio_dev *iio_device,
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
 		case IIO_UVINDEX:
-			*val = LTR390_WINDOW_FACTOR;
-			*val2 = LTR390_COUNTS_PER_UVI;
+			*val = LTR390_WINDOW_FACTOR * LTR390_FRACTIONAL_PRECISION;
+			*val2 = ltr390_counts_per_uvi(data);
 			return IIO_VAL_FRACTIONAL;
 
 		case IIO_LIGHT:
-- 
2.43.0