[PATCH 2/3] clk: qcom: gcc-msm8998: Add Q6 BIMC and LPASS core, ADSP SMMU clocks

From: Marc Gonzalez
Date: Wed Aug 14 2024 - 12:25:00 EST


From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>

Add the Q6 BIMC, LPASS core/adsp SMMU clocks to support audio related
functionality on MSM8998 and APQ variants.

As a final step to entirely enable the required clock tree for the
lpass iommu and audio dsp, add the lpass core/adsp GDSCs.

As a side note, it was found out that disabling the lpass core GDSC
at any time would cause a system lockup (and reboot): disabling
this GDSC will leave the lpass iommu completely unclocked, losing
its state entirely - including the secure contexts that have been
previously set-up from the bootloader/TrustZone.
Losing this IOMMU configuration will trigger a hypervisor fault,
which will reboot the system; the only workaround for this issue
is to declare the lpass core gdsc as always-on.

It should also not be forgotten that this is all about firmware and
there may be a version of it that doesn't enable this GDSC at all
before booting Linux, which is the reason why this specific declaration
wasn't simply omitted.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
Signed-off-by: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
---
drivers/clk/qcom/gcc-msm8998.c | 62 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 90b66caba2cdf..7fda2253a184b 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2922,6 +2922,43 @@ static struct clk_branch ssc_cnoc_ahbs_clk = {
},
};

+static struct clk_branch hlos1_vote_lpass_core_smmu_clk = {
+ .halt_reg = 0x7D010,
+ .clkr = {
+ .enable_reg = 0x7D010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data) {
+ .name = "hlos1_vote_lpass_core_smmu_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch hlos1_vote_lpass_adsp_smmu_clk = {
+ .halt_reg = 0x7D014,
+ .clkr = {
+ .enable_reg = 0x7D014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data) {
+ .name = "hlos1_vote_lpass_adsp_smmu_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mss_q6_bimc_axi_clk = {
+ .halt_reg = 0x8A040,
+ .clkr = {
+ .enable_reg = 0x8A040,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data) {
+ .name = "gcc_mss_q6_bimc_axi_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct gdsc pcie_0_gdsc = {
.gdscr = 0x6b004,
.gds_hw_ctrl = 0x0,
@@ -2953,6 +2990,26 @@ static struct gdsc usb_30_gdsc = {
.flags = VOTABLE,
};

+static struct gdsc hlos1_vote_lpass_adsp = {
+ .gdscr = 0x7d034,
+ .gds_hw_ctrl = 0x0,
+ .pd = {
+ .name = "lpass_adsp_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = VOTABLE,
+};
+
+static struct gdsc hlos1_vote_lpass_core = {
+ .gdscr = 0x7d038,
+ .gds_hw_ctrl = 0x0,
+ .pd = {
+ .name = "lpass_core_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = ALWAYS_ON,
+};
+
static struct clk_regmap *gcc_msm8998_clocks[] = {
[BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
[BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr,
@@ -3133,12 +3190,17 @@ static struct clk_regmap *gcc_msm8998_clocks[] = {
[GCC_MMSS_GPLL0_DIV_CLK] = &gcc_mmss_gpll0_div_clk.clkr,
[GCC_GPU_GPLL0_DIV_CLK] = &gcc_gpu_gpll0_div_clk.clkr,
[GCC_GPU_GPLL0_CLK] = &gcc_gpu_gpll0_clk.clkr,
+ [HLOS1_VOTE_LPASS_CORE_SMMU_CLK] = &hlos1_vote_lpass_core_smmu_clk.clkr,
+ [HLOS1_VOTE_LPASS_ADSP_SMMU_CLK] = &hlos1_vote_lpass_adsp_smmu_clk.clkr,
+ [GCC_MSS_Q6_BIMC_AXI_CLK] = &gcc_mss_q6_bimc_axi_clk.clkr,
};

static struct gdsc *gcc_msm8998_gdscs[] = {
[PCIE_0_GDSC] = &pcie_0_gdsc,
[UFS_GDSC] = &ufs_gdsc,
[USB_30_GDSC] = &usb_30_gdsc,
+ [LPASS_ADSP_GDSC] = &hlos1_vote_lpass_adsp,
+ [LPASS_CORE_GDSC] = &hlos1_vote_lpass_core,
};

static const struct qcom_reset_map gcc_msm8998_resets[] = {

--
2.34.1