Re: [RFC PATCH 10/11] dt-bindings: clk: microchip: mpfs: remove first reg region

[Rob Herring (Arm)]

On Thu, 15 Aug 2024 15:01:13 +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> 
> The first reg region in this binding is not exclusively for clocks, as
> evidenced by the dual role of this device as a reset controller at
> present. The first region is however better described by a simple-mfd
> syscon, but this would have require a significant re-write of the
> devicetree for the platform, so the easy way out was chosen when reset
> support was first introduced. The region doesn't just contain clock and
> reset registers, it also contains pinctrl and interrupt controller
> functionality, so drop the region from the clock binding so that it can
> be described instead by a simple-mfd syscon rather than propagate this
> incorrect description of the hardware to the new pic64gx SoC.
> 
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
>  .../bindings/clock/microchip,mpfs-clkcfg.yaml | 33 +++++++++++--------
>  1 file changed, 19 insertions(+), 14 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dts:22.21-47: Warning (reg_format): /example-0/soc/clock-controller@3E001000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dts:20.51-25.15: Warning (avoid_default_addr_size): /example-0/soc/clock-controller@3E001000: Relying on default #address-cells value
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dts:20.51-25.15: Warning (avoid_default_addr_size): /example-0/soc/clock-controller@3E001000: Relying on default #size-cells value
Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240815-fernlike-levitate-6004f5f46d66@spud

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.