[PATCH v1 09/12] clk: at91: sam9x60: Allow enabling main_rc_osc through DT

[Alexander Dahl]

SAM9X60 Datasheet (DS60001579G) Section "23.4 Product Dependencies"
says:

    "The OTPC is clocked through the Power Management Controller (PMC).
    The user must power on the main RC oscillator and enable the
    peripheral clock of the OTPC prior to reading or writing the OTP
    memory."

The code for enabling/disabling that clock is already present, it was
just not possible to hook into DT anymore, after at91 clk devicetree
binding rework back in 2018 for kernel v4.19.

Signed-off-by: Alexander Dahl <ada@xxxxxxxxxxx>
---
 drivers/clk/at91/sam9x60.c       | 3 ++-
 include/dt-bindings/clock/at91.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index e309cbf3cb9a..4d5ee20b8fc4 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -207,7 +207,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
 	if (IS_ERR(regmap))
 		return;
 
-	sam9x60_pmc = pmc_data_allocate(PMC_PLLACK + 1,
+	sam9x60_pmc = pmc_data_allocate(PMC_MAIN_RC + 1,
 					nck(sam9x60_systemck),
 					nck(sam9x60_periphck),
 					nck(sam9x60_gck), 8);
@@ -218,6 +218,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
 					   50000000);
 	if (IS_ERR(hw))
 		goto err_free;
+	sam9x60_pmc->chws[PMC_MAIN_RC] = hw;
 
 	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, NULL, 0);
 	if (IS_ERR(hw))
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
index 3e3972a814c1..f957625cb3ac 100644
--- a/include/dt-bindings/clock/at91.h
+++ b/include/dt-bindings/clock/at91.h
@@ -25,6 +25,7 @@
 #define PMC_PLLBCK		8
 #define PMC_AUDIOPLLCK		9
 #define PMC_AUDIOPINCK		10
+#define PMC_MAIN_RC		11
 
 /* SAMA7G5 */
 #define PMC_CPUPLL		(PMC_MAIN + 1)
-- 
2.39.2