Return the actual error code upon failure to allocate extcon device, instead
of hardcoding -ENOMEM. Use dev_err_probe() to also log appropriate messages,
which is fine because the containing function is used in the probe path.
Helped-by: Heiko Stubner <heiko@xxxxxxxxx>
Signed-off-by: Dragan Simic <dsimic@xxxxxxxxxxx>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 113bfc717ff0..05af46dda11d 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -435,7 +435,8 @@ static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
rockchip_usb2phy_extcon_cable);
if (IS_ERR(edev))
- return -ENOMEM;
+ return dev_err_probe(rphy->dev, PTR_ERR(edev),
+ "failed to allocate extcon device\n");
ret = devm_extcon_dev_register(rphy->dev, edev);
if (ret) {