[PATCH net-next 1/2] dt-bindings: net: marvell,aquantia: add properties to override MDI_CFG

[Daniel Golle]

Usually the MDI pair order reversal configuration is defined by
bootstrap pin MDI_CFG. Some designs, however, require overriding the MDI
pair order and force either normal or reverse order.

Add properties 'marvell,force-mdi-order-normal' and
'marvell,force-mdi-order-reverse' for that purpose.

Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/net/marvell,aquantia.yaml      | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
index 9854fab4c4db0..c82d0be48741d 100644
--- a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
@@ -48,6 +48,16 @@ properties:
   firmware-name:
     description: specify the name of PHY firmware to load
 
+  marvell,force-mdi-order-normal:
+    type: boolean
+    description:
+      force normal order of MDI pairs, overriding MDI_CFG bootstrap pin.
+
+  marvell,force-mdi-order-reverse:
+    type: boolean
+    description:
+      force reverse order of MDI pairs, overriding MDI_CFG bootstrap pin.
+
   nvmem-cells:
     description: phandle to the firmware nvmem cell
     maxItems: 1
-- 
2.46.0