Re: [PATCH 12/13] media: qcom: camss: Add CSID Gen3 support for sm8550

From: Vladimir Zapolskiy
Date: Sat Aug 24 2024 - 09:19:39 EST


On 8/12/24 17:41, Depeng Shao wrote:
The CSID in sm8550 is gen3, it has new register offset and new
functionality. The buf done irq,register update and reset are
moved to CSID gen3.

The sm8550 also has a new block is named as CSID top, CSID can
connect to VFE or SFE(Sensor Front End), the connection is controlled
by CSID top.

Co-developed-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
Signed-off-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
Signed-off-by: Depeng Shao <quic_depengs@xxxxxxxxxxx>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
.../platform/qcom/camss/camss-csid-gen3.c | 339 ++++++++++++++++++
.../platform/qcom/camss/camss-csid-gen3.h | 26 ++
.../media/platform/qcom/camss/camss-csid.c | 46 ++-
.../media/platform/qcom/camss/camss-csid.h | 10 +
drivers/media/platform/qcom/camss/camss.c | 91 +++++
drivers/media/platform/qcom/camss/camss.h | 2 +
7 files changed, 503 insertions(+), 12 deletions(-)
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-gen3.c
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-gen3.h

diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index e636968a1126..c336e4c1a399 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -7,6 +7,7 @@ qcom-camss-objs += \
camss-csid-4-1.o \
camss-csid-4-7.o \
camss-csid-gen2.o \
+ camss-csid-gen3.o \
camss-csiphy-2ph-1-0.o \
camss-csiphy-3ph-1-0.o \
camss-csiphy.o \
diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen3.c b/drivers/media/platform/qcom/camss/camss-csid-gen3.c
new file mode 100644
index 000000000000..d96bc126f0a9
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-csid-gen3.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-csid-gen3.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (c) 2024 Qualcomm Technologies, Inc.
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include "camss.h"
+#include "camss-csid.h"
+#include "camss-csid-gen3.h"
+
+#define CSID_TOP_IO_PATH_CFG0(csid) (0x4 * (csid))
+#define OUTPUT_IFE_EN 0x100
+#define INTERNAL_CSID 1
+
+#define CSID_RST_CFG 0xC
+#define RST_MODE 0
+#define RST_LOCATION 4
+
+#define CSID_RST_CMD 0x10
+#define SELECT_HW_RST 0
+#define SELECT_SW_RST 1
+#define SELECT_IRQ_RST 2
+
+#define CSID_CSI2_RX_IRQ_STATUS 0x9C
+#define CSID_CSI2_RX_IRQ_MASK 0xA0
+#define CSID_CSI2_RX_IRQ_CLEAR 0xA4
+#define CSID_CSI2_RX_IRQ_SET 0xA8
+
+#define CSID_CSI2_RDIN_IRQ_STATUS(rdi) (0xEC + 0x10 * (rdi))
+
+#define CSID_CSI2_RDIN_IRQ_CLEAR(rdi) (0xF4 + 0x10 * (rdi))
+#define CSID_CSI2_RDIN_IRQ_SET(rdi) (0xF8 + 0x10 * (rdi))
+
+#define CSID_TOP_IRQ_STATUS 0x7C

The list of macros shall be sorted by register offset value.

+#define TOP_IRQ_STATUS_RESET_DONE 0
+
+#define CSID_TOP_IRQ_MASK 0x80
+#define CSID_TOP_IRQ_CLEAR 0x84
+#define CSID_TOP_IRQ_SET 0x88
+
+#define CSID_IRQ_CMD 0x14
+#define IRQ_CMD_CLEAR 0
+#define IRQ_CMD_SET 4
+
+#define CSID_REG_UPDATE_CMD 0x18
+
+#define CSID_BUF_DONE_IRQ_STATUS 0x8C
+#define BUF_DONE_IRQ_STATUS_RDI_OFFSET (csid_is_lite(csid) ? 1 : 14)
+#define CSID_BUF_DONE_IRQ_MASK 0x90
+#define CSID_BUF_DONE_IRQ_CLEAR 0x94
+#define CSID_BUF_DONE_IRQ_SET 0x98
+
+#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
+
+#define CSID_CSI2_RX_CFG0 0x200
+#define CSI2_RX_CFG0_NUM_ACTIVE_LANES 0
+#define CSI2_RX_CFG0_DL0_INPUT_SEL 4
+#define CSI2_RX_CFG0_PHY_NUM_SEL 20
+
+#define CSID_CSI2_RX_CFG1 0x204
+#define CSI2_RX_CFG1_ECC_CORRECTION_EN 0
+#define CSI2_RX_CFG1_VC_MODE 2
+
+#define CSID_RDI_CFG0(rdi) (0x500 + 0x100 * (rdi))
+#define RDI_CFG0_TIMESTAMP_EN 6
+#define RDI_CFG0_TIMESTAMP_STB_SEL 8
+#define RDI_CFG0_DECODE_FORMAT 12
+#define RDI_CFG0_DT 16
+#define RDI_CFG0_VC 22
+#define RDI_CFG0_DT_ID 27
+#define RDI_CFG0_EN 31
+
+#define CSID_RDI_CFG1(rdi) (0x510 + 0x100 * (rdi))
+#define RDI_CFG1_DROP_H_EN 5
+#define RDI_CFG1_DROP_V_EN 6
+#define RDI_CFG1_CROP_H_EN 7
+#define RDI_CFG1_CROP_V_EN 8
+#define RDI_CFG1_PIX_STORE 10
+#define RDI_CFG1_PACKING_FORMAT 15
+
+#define CSID_RDI_CTRL(rdi) (0x504 + 0x100 * (rdi))

Sorted by register offset please.

+#define RDI_CTRL_START_CMD 0
+
+#define CSID_RDI_IRQ_SUBSAMPLE_PATTERN(rdi) (0x548 + 0x100 * (rdi))
+#define CSID_RDI_IRQ_SUBSAMPLE_PERIOD(rdi) (0x54C + 0x100 * (rdi))
+
+static inline int reg_update_rdi(struct csid_device *csid, int n)
+{
+ return BIT(n + 4) + BIT(20 + n);

Taking as unshifted bit BIT(4) is RUP and BIT(20) is AUP, add
corresponding macros for them, then

return (... | ...) << n;

+}
+#define REG_UPDATE_RDI reg_update_rdi
+

--
Best wishes,
Vladimir