Re: [PATCH] pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabled

From: Laurent Pinchart
Date: Mon Aug 26 2024 - 04:51:52 EST


Hi Liu,

Thank you for the patch.

On Mon, Aug 26, 2024 at 04:33:37PM +0800, Liu Ying wrote:
> It turns out that OSC_EN bit in GERNERAL_CFG register has to be set to 1
> when PWM state is enabled, otherwise PWM signal won't be generated.

Indeed, this likely got lost during one of the reworks. The apply
function correctly clears the bit when disabling PWM, but doesn't set it
otherwise.

> Fixes: e9b503879fd2 ("pwm: adp5585: Add Analog Devices ADP5585 support")
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Uwe, would you be able to queue this for v6.12 ?

> ---
> drivers/pwm/pwm-adp5585.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/pwm/pwm-adp5585.c b/drivers/pwm/pwm-adp5585.c
> index ed7e8c6bcf32..40472ac5db64 100644
> --- a/drivers/pwm/pwm-adp5585.c
> +++ b/drivers/pwm/pwm-adp5585.c
> @@ -100,6 +100,10 @@ static int pwm_adp5585_apply(struct pwm_chip *chip,
> if (ret)
> return ret;
>
> + ret = regmap_set_bits(regmap, ADP5585_GENERAL_CFG, ADP5585_OSC_EN);
> + if (ret)
> + return ret;
> +
> return regmap_set_bits(regmap, ADP5585_PWM_CFG, ADP5585_PWM_EN);
> }
>

--
Regards,

Laurent Pinchart