Re: [PATCH v3 1/8] arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC

From: Geert Uytterhoeven
Date: Mon Aug 26 2024 - 06:38:42 EST


Hi Prabhakar,

On Wed, Aug 21, 2024 at 10:56 AM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Add initial SoC DTSI for Renesas RZ/V2H(P) ("R9A09G057") SoC, below are
> the list of blocks added:
> - EXT CLKs
> - 4X CA55
> - SCIF
> - PFC
> - CPG
> - SYS
> - GIC
> - ARMv8 Timer
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v2->v3
> - Updated GIC node to match with the coding-style of DTS

Thanks for the update!

> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
> @@ -0,0 +1,165 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Device Tree Source for the RZ/V2H(P) SoC
> + *
> + * Copyright (C) 2024 Renesas Electronics Corp.
> + */
> +
> +#include <dt-bindings/clock/renesas,r9a09g057-cpg.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "renesas,r9a09g057";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + audio_extal_clk: audio-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + rtxin_clk: rtxin-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + qextal_clk: qextal-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };

Please use alphabetical sort order (by nodename).

> + soc: soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + pinctrl: pinctrl@10410000 {
> + compatible = "renesas,r9a09g057-pinctrl";
> + reg = <0 0x10410000 0 0x10000>;
> + clocks = <&cpg CPG_CORE R9A09G057_IOTOP_0_SHCLK>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pinctrl 0 0 96>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + power-domains = <&cpg>;
> + resets = <&cpg 165>, <&cpg 166>;

Please use hexadecimal reset numbers, cfr. the description in the DT
bindings. E.g. IOTOP_0_RESETN = CPG_RST_10 bit 5 => 0xa5.

This comment applies to all resets in this series.

> + };

> + scif: serial@11c01400 {
> + compatible = "renesas,scif-r9a09g057";
> + reg = <0 0x11c01400 0 0x400>;
> + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 536 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 537 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "eri", "rxi", "txi", "bri", "dri",
> + "tei", "tei-dri", "rxi-edge", "txi-edge";
> + clocks = <&cpg CPG_MOD 143>;

Please use hexadecimal module clock numbers, cfr. the description in
the DT bindings. E.g. CGC_SCIF_0_clk_pck = CPG_CLKON_8 bit 15 => 0x8f.

This comment applies to all module clocks in this series.

> + clock-names = "fck";
> + power-domains = <&cpg>;
> + resets = <&cpg 149>;
> + status = "disabled";
> + };

The rest LGTM.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds